200ml-5L double station plastic jerry can hollow extrusion bottle blowing making machine
BT full automatic double-station bottle blowing machine
The automatic blow molding machines, A wide variety of materials can be used for the machine, which are suitable for producing 1-5L PE plastic bottle. The clamping system is a high-precision double-station linear guide, extrusion system using a hard gear reducer and inverter. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
Main Characteristic:
1. Two station, single layer, 65mm screw, 20kw motor, PE / PP etc.
2. Power supply: 380VAC, 50Hz (depending on client's county ).
3. Die Head for choosing:
One head (2L-5L): 5L---around 180 bottles per hour
Two head (1L-2L): 2L---around 350 bottles per hour
Three head ( 500ml to 1L): 1L---around 800 bottles per hour
Four head (up to 500ml): 500ml---around 1000 bottles per hour
250ml---around 1500 bottles per hour
4. Center Distance: Two Die head: 120mm, Three Die head: 100mm, Four Die Head: 80mm
5. Deflashing system: Neck/ handle/ bottom deflashing
The main technical parameters
|
Model |
BT automatic double location blowing machine |
Maximum capacity |
10L |
|
Screw diameter |
80mm (38CrMoAla) |
Screw hotting power |
15kw |
|
Oil hydraulic pump power |
11kw |
Main motor power |
22kw |
|
Length to diameter ration(L/D) |
25:1 |
Max. Production (width X thickness) |
275x300 |
|
Economic speed |
180pcs/h |
platen max. open width |
650mm |
|
Mold open width |
230mm |
Die head heating power |
3kw |
|
Mold size |
325x350≥80 |
Platen side |
460x500x50 |
|
Thickness of mold |
160-320 |
Air blowing way |
Blowing up on bottle |
|
Air consumption |
0.5-0.8m3/min |
Raw material |
PE/PP |
|
Cropping type |
Hot cutting |
Clamping force |
