Electronic MK9 Cigarettes Maker Machines Large Capacity 5000 cig/min
In order to meet the international demand of the samll-sized and medium-sized factory, we have successfully improved MK9 cigarette making and plug assembing combination. The upgraded MK9 Cigarette Making Combination adopts Servo development of many parts, its stability and ccapability have been greatly improved.
Highlights
1. The cigarette cutting system uses the double-knife singlecutting system with lower-rise temperature and lower noise. This gives the very good quality of the cigarette
cut.
2. The complete suction system and high air pressure system .
3. The hopper system adopts AC servo motor to directly drive the tobacco cutting system. The timing belts are used instead of the gears, so the even tobacco-feeding is greatly improved and the maintenance cost is reduced as well.
4. It adopts AC servo driving system that simplifies the mechanical structures and reduces the failure and maintenance cost, and improves the transmission precision.
Parameters
|
Output |
5000cig/min (Normal Size) 3500cig/min (super slim/Nano) |
|
Frequency |
50Hz |
|
Total power |
50KVA |
|
Cigarette parameter |
Outside dimensions |
|
Filter-cigarette length |
65 110± 0.5 mm |
|
Cigarette maker |
3630× 1270 × 1870mm |
|
Tobacco rod length |
55 90 mm |
|
Plug assembler |
3340×1340× 1820mm |
|
Cigarette diameter |
φ 5.4 φ 9.0 mm |
|
Tray Filler |
2350×2400× 2100mm |
|
Power supply |
380V ± 10%(3phases) |
|
Total weight |
8600kg |
Making Process Requirements
|
1. Ambient conditions |
|
|
Temperature |
20--30 |
|
Relative humidity |
62--68 |
|
2. Paper bobbin |
|
|
Tensile strength |
≥0.85KN/m |
|
Extensibility |
1.6 |
|
Humidity |
6±1.5 |
|
Joint number |
1/1000 m |
|
3. Width |
48±0.3 mm |
|
Thickness |
0.04mm0.05 mm |
|
4. Cut tobacco |
|
|
Grade |
A |
|
Humidity |
12.5±0.5 |
|
5. Compress air |
5.5bar |
|
6. Viscosity of VPA |
|
|
For the maker |
2500mPa.s-5000mPa.s |
|
For the assembler |
5000mPa.s-10000mPa.s |
Picture
