RN series cylindrical roller bearing without out rings

Product Description

Cylindrical roller bearing mostly consist of the cage, the rollers and guided by two capped edges on a ring. It is a separable bearing, convenient for it's assembly and disassembly especially it has the advantages in a condition that the interference is required and assorted with inner ring, outer ring and housing. The bearing of this type can normally take the radial load, on the other hand, single row cylindrical roller bearing with ribbed inner ring and ribbed outer ring can take smaller axial load or intermittent axial load, this kind of bearing has a larger carrying capacity of axial load compare with the deep-grooves ball bearing. The structure of the bearing showing that it runs very well under high rotational speed.

RN series cylindrical roller bearing RN203 / RN204 / 502204 bearings without out rings  

*  Machining facility for special sizes of bearings 

*  Free sample testing available 

*  Low noise and no friction

*  High accuracy ,High speed

*  large in stock,quick delivery 

*  Excellent and high quality control

*  Small order accepted

*  Customers' drawing or samples accepted

These bearings are separable and are produced in several designs.

 N design The inner ring has two integral flanges and the outer ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings.

NU design The outer ring of bearings of the NU design has two integral flanges and the inner ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself.

NJ design The outer ring has two integral flanges and the inner ring one integral flange. The bearings are therefore suitable for the axial location of a shaft in one direction.

NF design The outer ring has one integral flange and the inner ring two integral flanges.

NP design  The outer ring has one integral flange and one non-integral flange in the form of a loose flange ring and the inner ring two integral flanges.

NUP design The outer ring has two integral flanges and the inner ring one integral flange and one non-integral flange in the form of a loose flange ring. The bearings can be used as locating bearings, i.e. they can provide axial location for a shaft in both directions.

RN design No outer ring and the inner ring two integral flanges. 

RNU design  The outer ring has two integral flanges and no inner ring.