Polycarnonate Single Phase Electrical Meter Box Bs Foot Print With Circuit Breaker
The CAM168-K1 is a non-metallic meter box products series are made of engineering plastic material such as Polycarbonate (PC) and Glass Fiber(GF). With advanced material technology, the products has impressive features like moisture-proof, impact resistance, aging resistance, corrosion resistance, high- transparency, UV-resistance, easy installation etc. Its professional design also makes functions like enhanced electricity usage safety protection, separated user operation and control, fully closed meter management, fully closed measurement circuit protection, meter tamper and fraud.
This box is widely used in African prepaid metering environments.
FUNCTIONS AND FEATURES:
• Compliant to British Standard BS 5685
• Fire retardant to BS 476, Part. 7, 1997, Class 2
• Complies to ESI standard 12-3 April, 1986
• Constructed from GRP – Glass Reinforced Plastic
• Suitable for all meters including prepay and smart
• Will not corrode, weather resistant
• Easily cleaned and can be painted
• Cable entry and meter tail positions are predrilled and supplied with in-fill cap,cable entry position via hockey stick (not supplied)
• Complete with hinges, lock and key
• Hinges on left
User Benefit
1) Folded edges to ensure user safety and minimise risk of damage to cables
2) Removable, double-hinged meter box door with retaining strap to keep door open during installation and maintenance
3) Meter box made from robust galvanised steel in a neutral painted finish (Matt Ivory) to blend into existing decor; also acts as a primer for additional painting
4) Painted interior and exterior for rust protection and quality finish
5) DIN rail models available
Specifications:
|
Material |
PC+10%GF |
|
Display Window |
Transparent |
|
Keypad Operation |
Operable (operation can be disabled upon utility's order request) |
|
Safety Protection |
Operable breaker inside box |
|
Flame-Resistance |
Comply with requirements of 960 glow-wire test as per IEC60695-2-1 |
|
Fire Resistance Test |
UL94-V0 Rated@1.5mm |
|
Meter Installation |
BS 5685 |
|
Insulation Level |
No flashover and breakdown phenomenon under 50/60Hz sine wave 2000V/min |
|
Heat Dissipation |
Ventilation holes for cooling |
|
Tamper Protection |
Seals |
|
Climate Effect |
Meter box won't crack and deform under the below temperature changes: From high temp of 60±2for 4h to 20 From low temp of -30±3for 4h to 20 |
|
Compression Resistance |
Meter box won't crack and be damaged when a weight of 100kg with an area of 10×10cm² is put on the display window or any position for 3 minutes |
|
Impact Resistance |
With fixed screws tightening on the meter box, do the free-fall test from a height of 2m, the meter box is intact and shock resistant |
