Single Phase Residential Electric Meter Box 16 Positions Pc Enclosure Bs Mounting
The CAM168-B16 is upgraded version of B12 type and used for multi-dwelling complex environments. It is equiped with a 300-400 Amp main safety switch along with 20-40Amp MCBs with leakage protections for user safety precautions. It is built upon a concept of cost-effective and affordable as well as safety first .It is intended to accommodate 16 pieces single phase electric meters either prepayment or smart. The main switch and MCB box part is made of Glass Reinforced Plastic(GRP) when the meter space part is made of Polycarbonate (pc). This box has over 500,000 installations in and out of China market and has a superme reputation for its finest quality and durability. The CAM168-B16 is moisture-proof, impact resistant, anti-aging and corrosion, and UV-resistant, allowing to be installed in very severe environments. The sectional design of dividing meter from the MCB and main switch provides utmost safety to consumers and field technicians.
FUNCTIONS AND FEATURES:
1) Superme electric shock prevention
2) With wires and 16P MCB and a main switch
3) British standard mounting installation
4) Transparent flame retardant PC door
5) Fire retardant material for box body
6) Designed for prepay and smart meters
7) Rated IP 54 protection
8) With hinges, lock and key
9) With tamper sensor that detects illegal open
User Benefit
a) Easy to install and replace
b) Folded edges minimizing damages to users and cables
c) Secional design with main switch and MCB to prevent electric shock
d) Double-hinged and removable, meter box door
e) Operatable under all climate conditions
f) Rust protection and quality finish
g) Din Rail models available
Specifications:
|
Material |
PC+10%GF |
|
Display Window |
Transparent |
|
Keypad Operation |
Operable (operation can be disabled upon utility's order request) |
|
Safety Protection |
Operable breaker inside box |
|
Flame-Resistance |
Comply with requirements of 960 glow-wire test as per IEC60695-2-1 |
|
Fire Resistance Test |
UL94-V0 Rated@1.5mm |
|
Meter Installation |
BS 5685 |
|
Insulation Level |
No flashover and breakdown phenomenon under 50/60Hz sine wave 2000V/min |
|
Heat Dissipation |
Ventilation holes for cooling |
|
Tamper Protection |
Seals |
|
Climate Effect |
Meter box won't crack and deform under the below temperature changes: From high temp of 60±2for 4h to 20 From low temp of -30±3for 4h to 20 |
|
Compression Resistance |
Meter box won't crack and be damaged when a weight of 100kg with an area of 10×10cm² is put on the display window or any position for 3 minutes |
|
Impact Resistance |
With fixed screws tightening on the meter box, do the free-fall test from a height of 2m, the meter box is intact and shock resistant |
