Refractory X-ray real-time imaging detection
X-ray Digital imaging system (DR - Digital Radiograph) by imaging, X-ray machine, the X-ray machine synchronous control unit, with the highest detection sensitivity of the high-tech equipment. All digital radiographic testing standard, including welding, casting, corrosion testing standards, including metal, nonmetal and composite materials testing a variety of purposes, such as widely used in aviation, spaceflight, automobile, electric power, petroleum, chemical industry, pharmacy, special inspection, etc. High reliability, long life, low failure rate, high resolution, high resolution detector humanized design software, the interface is simple, easy to operate, according to the test requirements, develop software functions
Scope of application and main technical parameter
1, Main application: used for refractory material: 3 big casting, refractory brick etc. Nonmetal and internal defects of all kinds of metal material, such as blow hole, shrinkage cavity, porosity,, weld defects, etc.
2.,Checked the product size:
Width: ≤500 mm , height≤ 600-2000 - mm
3, The X-ray flaw detection machine capacity: 350 kv, 5 mA
4, Cooling method: using closed refrigeration, has forced cooling, the flow protection, temperature protection and self protection tube temperature 40 ℃ or less and the capacity to ensure that equipment work continuously.
5,9 "X-ray real-time imaging system (XSC9B type)
6,The system sensitivity: dynamic sensitivity is better than 2.2%, the static sensitivity is better than that of 1.2% ~ 1.6%.
7, The system resolution: 16 ~ 24 lp/cm
8 ,for X ray films and real-time imaging shows two ways of working.
