Simple Electronics Projects On Breadboard Prototyping 18.3×16.5×0.85 cm
3 Terminal StripsProduct Tie-point 1920
5 Distribution Stips Tie-point 500
4 Binding Posts
1 Pcs/set
Paper Box
Housing Material: ABS
Contact Material: Ordinary metal
Connect Type: Socket
Min.Line Spacing: Pitch=2.54mm/0.1″
Surface Finishing: Spring clip
1. 110V or 220V AC input range selectable by switch
2. Dielectric withstanding voltage: AC 500V for 1 minute
3. DC adjustment range: ±10% rated output voltage
4. Overload protection: 125%~165% shut off, AC recycle to re-start
5. Over voltage proection: 112%~135% rated output
6. Fixed switching frequency at 25KHz
7. Contact resistance: 100mΩ max
8. Insulator resistance: 1000MΩmin. @DC 500V
9. Operating temperature: -20°c~+80°c
10. Plug times: ≥10000 times
11. 100% full load bum-in test
Accept transistors, diodes, LEDS, resistors, capacitors and virtually all types of components
Twin adhesive back, could be fix and remove to any position easily
Protection: Short circuit / Overload / Over voltage
Phosphor bronze nickel plated spring clips
Accepts a variety of wrie sizes(AWG:18-32)
Cooling by free air convection
All material Rohs compliance
Low cost, high reliability
Completely reusable
Packaging & Shipping
Below is the detailed packing information:
| Item No. | G.W. (KG) | N.W. (KG) | Quantity (pcs) | Measuremnt (cm) |
| ZY-W206 | 26 | 25 | 50 | 47×25×44 |
