Continuous Wire Drawing Machine Single Hook 50 Tires Per Hour Capacity
Structural Features:
This machine consist of motor ,hydraulic system,drawing hook,drawingmouth,
and main part,etc.its basic principle is Drien hydraulic system and made the
cylinder work by the motor to make the drawing hook liked the cylinder spull
pople reciprocate motion.put the tire on the drawingmonth and jut the drawing
mouth to hook steel wire. meanwhile the rubber part of tire is teared because
of the drawing mouth blick it.thus get the effect of separating smoothly.
Instruction of tire wire drawing machine
the line is complete automatic line, from drawing out the steel circle from the tire bead,
crushing the whole tyre, separating the thin steel and fiber to the rubber powder,
The line is recycling the waste tyre under the normal temperature.
Feature of tire wire drawing machine
1. it is used to crush the waste tires into rubber powder
2. it is good for environmental protection and energy saving, Market Prospect Broadness .
3. it can get iron/steel removing ratio>99.5%, fiber removing ratio>98%.
Hydraulic waste tire recycling equipment Single Hook Tyre Debeader
Flow working chart of tire wire drawing machine
waste tire---wire drawing ---whole tire cutter---rough crusher---rubber grinder----
magnetic separating and fiber separator---pulverizer unit---rubber powder
Technical Parameters:
| Model |
LS-1200 |
| Tire Diameter | <1200mm |
| Pull | 5T |
| Capacity | 20-50 tires/hour |
| Motor Power | 15Kw |
| Weight | 1.5T |
| Dimension | 4200*900*1700mm |
Advantages:
1. This machine integrate the waste tire wire cutting and extracting machine, which
reduces the cot and enhances the efficiency greatly!
2. dopts hydraulic reciprocating extracting method, full circle or half circle of
bead wire can be easily extracted.
3. Feedig oil by Duplex Impeller Pump with low operating noise, the two pumps will
supply oil at the same time when the Extracting Cylinder reach out, and only one
pump supplies oil when hauling back the bead wire, so as to reduce the dynamo's
loading current and save energy.
4. The speed and pressure of the Extracting Cylinder will not change when the
Pressing Cylinder is working, so as to enhance the machine's efficiency and extend
the Control Valve's lifetime greatly!
5. Operations are interchangeable between manual and automatic.
Our Waste Tire Recyling Plant can make rubber powder of 30-80 mesh from waste tire,
also, we can collect the scrap wire efficiently, also we have devices to collect and filter
the scrap and waste gas so that we can process the waste tire environmentally.
And we can customize this plant according to customer's requirements, such as
the capacity, the size of rubber powder or rubber particle.
If you are interested in our products ,Pls contact me!!!
