Backlight Module 3W Cree LED For Single-sided Light Box
Description:
- 3 modules/unit, each 3 modules can be cut.
- Constant voltage DC 12V input.
- High light efficiency, low power consumption, even light, high color index, energy-saving, easy installation.
- Adopting ultra brightness CREE LED, long lifespan, and uniform light color & brightness.
- Big viewing angle over 160°is good for back light.
- Appropriate for single-side lighting box, depth over 10cm.
- Recommended modules space 200*200mm in installation.
- Nice looking, top grade, easy installation.
Specifications:
|
Model number |
YS-M62E11 |
|
Voltage |
DC12V |
|
Power |
3W |
|
Kevin |
3000K/6000K/8000K |
|
Lumen/module |
200-240lm |
|
Viewing angle |
160 degree |
|
IP degree |
65 |
|
Size |
48*31*10.5mm |
|
Package |
4 strings per bag, 14 bags per outer carton, 1008pcs in total |
|
Parameters |
||||||
|
Part No. |
Emitting color |
Input voltage |
Luminous flux (Lm/led) |
Power/ led |
Color temperature or dominant wavelength |
Viewing angle |
|
YS-M62E11-PW |
Pure White |
DC12V |
200(lm/led) |
3W |
6000-6500 K |
160° |
|
YS-M62E11-WW |
Warm white |
DC12V |
200(lm/led) |
3W |
3000-3500 K |
160° |
|
YS-M62E11-CW |
Cold white |
DC12V |
200(lm/led) |
3W |
8000-10000 K |
160° |
|
YS-M62E11-R |
Red |
DC12V |
60(lm/led) |
3W |
625-630nm |
160° |
|
YS-M62E11-G |
Green |
DC12V |
120(lm/led) |
3W |
465-470nm |
160° |
|
YS-M62E11-B |
Blue |
DC12V |
50(lm/led) |
3W |
515-520nm |
160° |
Note:
1. Testing at ambient temperature:25±2
2. Above data are typical values. The real test results may be a little different from the typical values. If there is any change with the product, we won’t inform again.
Packing:
18pcs/string
72pcs/bag
1080pcs/ctn
GW: 19KG/CTN
Carton size: 52*30*35cm
Application
This product is mostly appropriate for back light in advertising light box, bus station light box and showing case.
Installation Notices
1. The white wires between modules cannot be cut. Only cut at the red wires.
2. Installed with thermal conductive double-sided adhesive, not 3M adhesive.
3. This product must be fixed on heat conductive materials such as aluminum, iron, etc.
Attention: Module design as per 3pcs in one group, and ONLY can be cut in Red Wire location.
Installation Instruction:
1. The lighting box cover need be white cloth.
2. Box width Dw, Dw = 800mm ~ 1600mm.
3. Box depth Dh,Dh = 150mm ~ 300mLED
4. LED space Ds. Recommend Ds = 100mm.
