Dia 1 inch to 5 Inch Forged Grinding Media Steel Ball HRC 55-65
THE PROCESS LINE OF PRODUCTION:
Raw materilals----Cuttlng----Stove----Forglng----Transter machine----Quenching----Heat treament----Dimension test----Hardness test----Packing----Transportation----Sea freight
High Hardness: The surface hardness of forged and rolling balls is to 60-65 HRC and volume hardness is to 60-63 HRC
High Impact Toughness: The impact toughness is more than 12 J/cm2;
Low Broken Rate: The actual broken rate is not higher than 1%;
Even Wear-resistance: The loss of ball round rate is 50-300 g/ton.
Chemical composition:
| Material | C | Mn | Si | Cr | S | P |
| 50MN | 0.48-0.56 | 0.70-1.0 | 0.17-0.37 | 0.25 max | 0.035max | 0.035max |
| 60MN | 0.57-0.65 | 0.70-1.0 | 0.17-0.37 | 0.25 max | 0.035max | 0.035max |
| 65MN | 0.60-0.70 | 0.90-1.20 | 0.17-0.37 | 0.25 max | 0.035max | 0.035max |
| 75Mn | 0.72-0.92 | 0.17-0.37 | 0.7-1.0 | 0.4-0.6 | 0.035max | 0.035max |
| 75MnCr | 0.70-0.85 | 0.7-0.8 | 0.17-0.37 | 0.2-0.7 | 0.03 max | 0.03 max |
| 75SiMn | 0.70-0.90 | 0.7-1.2 | 0.4-0.8 | 0.25 max | 0.03 max | 0.03 max |
Specifications:
|
Nominal diameter (mm) |
Diameteical tolerance (mm) |
Weight of Single of forging ball in average |
Number of piece of One ton forging ball in average |
Surface hardness |
Impact toughness |
|
DIA 20 DIA 25 DIA 30 DIA 40 DIA 50 |
+2 -1 |
32 64 110 263 513 |
31250 15625 9090 3802 1949 |
55-65 |
≥12 |
|
DIA 60 DIA 70 DIA 80 DIA 90 DIA 100 |
+3 -2 |
888 1410 2104 2996 4110
|
1126 709 475 333 243 |
||
|
DIA 110 DIA 120 DIA 130 |
+4 -2 |
5457 7102 9030 |
182 140 110 |
||
|
DIA 140 DIA 150 |
+4 -3 |
11278 13871 |
88 72 |
Raw Material:
Strict quality control of steel material from BIG STEEL FACTORY GROUP.You know the good grinding balls quality depends on the good raw material.
Prodcution Line:
