Single Injection Air Jet Textile Machine For Weaving Jacquard Fabric
Introduction of the machine
It is suitable for weaving jacquard fabric, multi-color fabric of high performance jet looms, cotton, wool, silk can be used, Ma. chemical fiber and other raw materials, weaving fabric with high added value, reed width can reach 190-360cm, the machine adopts electronic let-off, electronic take-up, speed up to 350-650rpm. APPlication 0f 2688 needles, 5012needles and other electronic jacquard shedding, weft accumulator can choose double to six spray, bilateral six Linkage Beating-up, high gegree of automation, adapt to a wide range of.
Main specifications
|
Reed space |
190,230,280,340,360CM |
|
Weft selection |
Double, four, or six nozzles free weft selection |
|
power |
Super start, through electromagnetic brake, angle parking |
|
motor |
5.5,6.5,7.5kw |
|
Weft insertion |
Main ,auxiliary nozzle with profiled reed electromagnetic valve control |
|
shedding |
Two heald frame, the crank opening |
|
Let-off |
Electronic let-off |
|
Take-up |
Electronic, maximum roll diameter 600 |
|
Beating-up |
Six linkage beating-up |
|
selvage |
Planetary leno edge |
|
cutter |
mechanical |
ADVANTAGE:
New type of rear beam structure
The latest dual real beam moving structure with swinging connecting rod mounted outside, and since the overall structure is moved downward it is very easy to adjust
Raising and lowering structures of double rollers
At rolling up, the double roller structure can raise the upper and lower roller at the same time which will take out the fabric together with take-up roller. It is easy, convinient, safe and reliable.
New type of pressure relief unit
With all pressure adjusting valves located at one place, it is easy to adjust, loss on air flow reduced, air source saved, and energy consumption reduced.
High strength frame structure
A strong machine frame has been consructed with box typed wall sheets, square tubes and angle beams, with braces in the middle, support sheets welded on the top and bottom side of the front beams, and solid beating beams.
