Micro Coating Thickness Meter CM-1210-200N
Applications:
Measure the thickness of coating on the base.
Measuring method:N probe
Coating:anodizing, varnish, paint, enamel, plastic coatings, powder,etc.(non-conductive coatings)
Base:aluminum, brass, non-magnetic stainless steel, etc(non-magnetic materials)
Features:
* Specially for the thickness measurement of coating on small workpiece.
* Measuring methods: eddy current (N).
* Two measurement mode: Single and Continuous
(Notice:Continuous mode is convenient to measure the coating thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use USB data output and RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
* Separate Type, measurements can be more flexibility.
Details:
| Operating Principle | Eddy Current (NF) |
| Measuring Range | 0~200 um / 0~8 mil |
| Resolution | 0.1 um |
| Min. Radius Workpiece | convex 2 mm / concave 4 mm |
| Min. Measuring Area | 2 mm |
| Min. Sample Thickness | 0.1 mm |
| Accuracy | ± 1~3%n or ± 2.5 um |
| Auto Power Off | |
| Metric / Imperial | Convertible |
| Battery Indicator | Low Battery Indicator |
| Operating Conditions | Temp. 0~40 °C, Humidity: 10~90 %RH |
| Power Supply | 4 x 1.5 V AAA (UM-4) Battery |
| Dimensions | 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch ) |
| Weight | 215 g (Not Including Batteries) |
Accessories:
Standard Accessories:
1. Main Unit
2. Probe (NF Type)
3. Calibration Base Set (NF Type) CTG-BS
4. Calibration Foils CTG-CF (1 set, 4 pieces)
5. Carrying Case
6. Operation Manual
Optional accessories:
1. USB, RS-232C data cable with software
2. Bluetooth data out put with software
For more details,please do not hesitate to contact Lisa.Thank you!
.jpg)
