380V 50Hz Sizing Yarn Sizing Process Machine With Single Slurry
Appropriate technology
This machine adopts the full-width flake-like dyeing method; after finishing the warping, the warp will boiled, dyed, starched and baked by the machine, and then be rolled by the weaver's beam and provided for the next process for weaving.
Main parameters of equipment
Width of the dyeing sizer
Rear part: 1800, 2000mm (creel, dying areas, yarn-storage and dyeing)
Headstock of the sizing machine: 2200mm(coiled pipe 2800mm, Max.)
2400mm(coiled pipe 3200mm, Max.)
Running speed of dying-sizing range
Rear part: 5-35m/min(creel, dying areas and dying drying chanber)
Front part: 5-45m/min(plasm trough, sizing-yarn drying chamber and headstock)
Creel disc diameter: phi1000mm(Max)
Beam s=disc diameter: phi110-phi1000mm
Steam pressure: >0.3Mpa
Transmission model: mutual-unit and variable-frequency synchronous transmission
Working voltage: AC380V, 50HZ
Power of complete equipment: 110KW(15dye vats)
Pressure of pressed air: >0.5Mpa
Yarn-restored capacity on yarn-restored frame: 90m
White warp storage rack and drive
The driving padder can efficiently control the respective tension of warp and dyeingarea, improve the pre-treatment and dyeing effect. With the white warping yarn-storing frame, the yarn and dyeing can not be needed and which can save plenty of production cost.
