Security Access Gates Electronic Turnstile for Office / Hospital / Building
Intelligent swing gate turnstile CPW-322DS with bridge type is well-sold with high performance cost ratio, with DC bruchsless motor, 10 pairs IR sensors and exact positioning encoder.
Application:
Government buildings
Airports
Customs
Exhibition halls
Financial institutions
Basic Function:
- Automatic reset function: The turnstile will open the gate after receiving the valid opening signal when standby. The swing gate will return to the hindered zero position automatically under the following situation:
(1) Within the allowed time, pedestrians have been detected in the specified direction passing the passage;
(2) Over the allowed time, there is no people has been detected passing in the passage.
- Self-recovery function: The swing gates do not return to the hindered zero position because of human intervention. After revoking human intervention, the gate automatically return to the hindered zero position.
- Automatic adjustment function: When the turnstiles need to re-adjust because of mechanical wear, the main board can automatically adjust, accurate and convenient.
- Passing indication function:
(1) Direction indicator: The direction indicator is installed on the top of the housing to indicate the valid passing direction.
(2) Passing status indicator: It is installed inside the housing side, indicating whether the swing gates can open after receiving the valid signal.
- Compatibility: Equipped with the dry contact signal input interface, RS485/RS232 interface, TCP/IP interface (optional), compatible with all kinds of access controllers.
- Memory function of passing requests: When more than 2 passing signals are given at the same time (including the same direction and opposite direction), the system will remember all the passing requests and finish them one by one. The number can be up to 255.
- Passing mode switching function:The entry and exit can be set independently controlled mode / free mode / forbidden mode
Technical Parameter:
Machinery Mechanism | MTHTTM Lossless mechanism |
Operation Temperature | -20~60 |
Controlling Method of Motor | DSP |
Passing mode | controlled mode / free mode / forbidden mode |
Housing material | 304 grade stainless steel |
Power and Voltage | 100-240VAC, 50/60HZ |
Rated Power | 100W |
Communication Interface | RS485 / RS232 (default); TCP/IP (optional) |
IR Sensors | 10 Pairs (default) |
Surface treatment | brushed finish |
Positioning Method | Encoder |
Humidity |
0~95% (non-condensation) |
Accessrories:
Turnstile direction indicator
Turnstile passage status lights
Turnstile control board
Turnstile Mechanism
Turnstile motor board
Turnstile motor
Turnstile encoder
Turnstile power supply
Turnstile IR sensors
Turnstile housing (NO. 304 stainless steel at 1.5MM thickness) etc.