CE Certified Forming & Sizing mill Midium size
Description:
The mill is intended for manufacturing round pipe Φ32mm-Φ89mm with thickness of 1.5mm–4.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe
II. The technical flow of the production line
{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→
Spiral Accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
Steel Tape Specification
Material: | Carbon steel (δb≤500Mpa, δs≤235Mpa) |
Inner diameter: | 470-510mm |
Outer diameter: | Max1500mm |
Strip steel width: | 100mm-280mm |
Strip steel thickness: | 1.5mm-4.5mm |
The maximum weight: | 4.0 MTS |
Electric installed capacity: | Appro. 600KW |
Size of the whole line: | Appro. 70X6m |
Line Speed: | 20-70m/min
|
After Service
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.If there is any problem found of the machine, we will repair it for free in one year.
