Back Welding Machine For H Beam Horizontal Production Line With Lincoln DC-1000
1. Specifications:
| Items | Parameter |
| Web height | 300~1200 mm |
| Web thickness | 3~8 mm |
| Flange width | 150-500 mm |
| Flange thickness | 5~16 mm |
| Welding speed |
max 2m/min |
| Roller conveyor speed |
about 8m/min |
|
Edge angle of reduce section |
≤8° |
|
Motor of roller |
2.2KW*2 |
|
Motor of hydraulic pump station |
18.5KW |
|
Total capacity |
24.5KW+90KVA*2 |
2. Description:
Back welding machine is a new machine, which composes of mechanism, electri, hydraulic and vacuum. The machine will finish the other welding of H-beam steel. It has high automation, easy operation and even welding quality.
3. Main parts part of the machine ( supply range )
a. Conveying roller
b. Main machine
c. Two sets of flux recovery machine
d. Two sets of welding machine ( lincoln DC-1000)
e. Hydraulic system (main valve parts from shanghai lixin, pump from shaoyang)
f. Electrical control system ( Schneider and Mitsubishi )
4. Accessories and service tools
| 1 | Energe-saving exposion-protective light | 36W/220V | 1 | |
| 2 | Limit switch | XCK-J10541 | 1 | |
| 3 | Light | 6V/1.5WDL1-CB006 | 5 | |
| 4 | Control switch(with light) | XB2-BW3361 | 2 | |
| 5 | Three-position switch base (with light) | ZB2-BW063 | 1 | |
| 6 | Three-position switch base (with light) | ZB2-BK133 | 1 | |
| 7 | Aviation plug | YD32J10TR | 1 | |
| 8 | Aviation plug | YD32K10Z | 1 | |
| 9 | Aviation plug | YD32J19TR | 1 | |
| 10 | Aviation plug | YD32K19Z | 2 | |
| 11 | Lever type grease gun | A 200cm | 1 | |
| 12 | Inner hex wrench | 3-14 | 1 | |
| 13 | Open-end wrench | 12-14 | 1 | |
| 14 | Open-end wrench | 17-19 | 1 | |
| 15 | Oil can | 1 | ||
| 16 | Cross | 150*60 | 1 | |
| 17 | Slot | 150*70 | 1 |
