HGP1016-8 Type H Beam Shot Blasting And Rust Cleaning Machine
1. Specifications:
| Model | HGP1016-8 |
|
Width×height of work-piece |
≤1000×1600mm |
|
Length of work-piece |
12000mm |
|
Quality requirement |
Sa2.5, Ra15-50 |
|
Model of impeller head |
Q034II |
|
Turning speed of impeller head |
2950r/min |
|
Driving speed of impeller head |
8×11kw |
|
Conveyor |
Input and output conveyor 12m each |
|
Conveyor loading capacity |
1000kg/m |
| Conveyor speed |
0.55m/min VFD |
| Total power |
≈140 KW |
2. Description:
Steel pretreatment line steel technology in the processing refers to the former (that is, a state of raw materials) for shot blasting the surface rust and painted with a protective coat of processing technology. After pre-treatment of steel products can improve the mechanical and corrosion-resistant metal components ability of anti-fatigue properties of steel, extending its life; but also can optimize the production process of steel surface, and is conducive to cutting machine CNC cutting and precision blanking.
In addition, pre-processing of steel as a result of comparing the shape of the rules in favor of mechanical and automated spray paint rust, so the use of steel pre-treatment can enhance the efficiency of clean-up, clean-up operations to reduce labor intensity and the pollution of the environment. In recent years, as a result of the use of PLC control, automation equipment, greater emphasis has been improved.
The work-piece should be put on the roller conveyer to set speed through the shot-blasting chamber. Before the work-piece transported into the shot-blasting area, start on the shot feeding device, at the same time, the impeller heads begin running on load. This machine improves the corrosion resistance to the metal profile of the machine, anti-fatigue performance and extend steel lifetime. It also improves the steel surface processing craft, the surface preparation efficiency, reducing the labor intensity.
3. Lubrication
| Serial No. | Parts | Count | Cycle | Oil |
| 1 | Motor of impeller head | 8 | One week | 2# lime grease |
| 2 | Bearing base | 82 | Three months | 2# lime grease |
| 3 | Cycloid reducer | 6 |
Lubricate according to motor operation manual |
|
|
4 |
High voltage centrifugal ventilator motor |
2 |
||
