250 Ton Tandem Press Brake CNC DELEM Control System 12m Long

250 Ton Tandem Press Brake CNC DELEM Control System 12m Long

Product Configuration:

Product Describe:

1.The frame of machine is composed of tank, worktable, left and right housings and ram.

So it has high strength and good rigidity. Also it takes vibration to eliminatestress.

2. Synchronization working principal of this machine:Adopting electric-hydraulic

proportional valve to ensure the synchronization of this machine. The proportional

valve is made by BOSCH-REXROH company with very good performance such as small

friction between mechanic action pairs, fine electronic amplifier and electric magnet

with high controlling force and continuous action. There are two raster displayers on

3. both sides of machine to inspect the position of ram continuously and feed back the

signal to control system, then the control system will control electric-hydraulic valve

to make two cylinders synchronization on one machine.

4.Because the raster displayers are installed to “C” plates, not on housing plates directly,

the deflection of ram and

5.frame when working will not effect its measuring and controlling precision. 

Upper Punching and bottom die:

• the upper punching adopt the short punching head to easy change.
• The short punching head connect with holder by screw
• the punching head can have section
• the bottom die adopt insert die to bend the angle.
• increase & decrease the insert block can bending different thickness sheet metal

DA-52s system feature:

DA-52s Compact 4-axis colour CNC system for press brakes
The compact DA-52s is a complete CNC solution for conventional as well as

synchronised press brakes. The panel based control, capable of controlling up to

 4 axes, can be integrated in cabinets as well as in an optional pendulant arm

housing. Equipped with the Delem user-friendly user interface, the DA-52s provides

all main press brake functionality.
The unique ‘hotkey’ navigation gives direct access to the programs in memory and

enables quick and easy programming of a product. All common bend parametersm 

are located on one page.

For advanced parameters an additional page can be selected.  Angle

programming of the Y-axis, crowning function and pressure control are standard

on board.
USB interfacing enables the use of memory sticks as a fast product and tool

backup medium. 

 
  Specification:

Mr. Mr. Zou Tel: 86-510-83212533
	Enter between 20 to 3,000 chatacters.