Air Velocity Transmitters

ASP-U air velocity transmitters are ideal for accurate ventilation control applications. They are operating on an innovative hot film anemometer principle.The ESODRIVE thin film sensor guarantees very good accuracy at low air velocity. Moreover, the ESODRIVE sensor is much more in-sensitive to dust and dirt than all other anemometer principles. This means high reliability and low main-tenance costs. ASP-U series are available with current or voltage output, the measuring range and the response time can be selected with jumpers by the user. Low angular dependence enables easy, cost-effective installation. An integrated LCD display and a version with

remote sensing probe are available.

 

Suitable for HVACPurification Room,LaboratoryCleaning plant

Feature

* Indegret Design

* Accuracy measurement in the low velocity speed

 

Installaion

* Plastic flange fix installation.                           Aadjust and make sure the same angle of the wind direction and the transmitter.

* Installed the transmitter back of the Static Pressures box when messure the total air volume,

* Controlling damper actuator: to be installed more than 1.5m in front of the offshot of the damper or no less than 1.5m in the back of the damper.

* Measure the room velocity speed: regulate according the actual situation                                    

Modle

ASP-U

Mesuring Range

0-15m/s

Accuracy of Measurement

0.20%

Accuracy

0.05m/s

Power supply

AC15...26V DC13...24V

Frequency

50/60HZ

Output

010V

Power

10W

Allowable cable lenth

0.5mm²BVVR cable 70m

1.0mm²BVVR cable 200m

1.5mm²BVVR cable 350m

Other non-shielded cables use shorter cable

Connection Terminal Block

Screw Connect Terminal Block 3X1.5mm²

Working Enviroment

Temperature: -5+70

Humidity:5%-95%

Lenth

Standard:350mm (can be ordered    according the requirement)

Color:

Off white\gray