High Stability Dp Pressure Transmitter Interface With Waterproof Concentrator
Introduction:
The MT2000W series diffusion silicon pressure transmitter adopts the military grade traducer as
sensitive element. It applies shielding and eliminating process of new hit-resistant capacitance, RF,
overcurrent, and voltage strong signal. The subsequent circuit has higher stability and antijamming
capability, because the peripheral circuit layout and component selection are more reasonable than
American TI(BB) company operational amplifier.
Features:
- Diaphragm:316L stainless steel
- Process connection:M20 x 1.5 male thread;stainless steel
- Sealing: Fluorine rubber
- Shell and Surface:Aluminum;epoxy
- Installation location:No special requirements
- Weight:about 0.5kg
- Accuracy: ±1.1% ±0.2%
- Measuring Range: -0.1KPa~0~100KPa~40KPa (maximum100MPa)
- Temperature: Ambient temperature:-20~85 Medium Temperature: -20~90 Storage Temperature: -40~85
- Relative Humidity: <95%
- Output Signal: 4~20mAD
- Working Pressure: 24VDC, 12VDC
- Stability: better 0.1%FS /year
- Overload Limit: 150%~300%
- Upgrade Features:
No polar connection ( only analog circuitry, 24VDC power supply)
Field (outdoor) lightning-proof design
Quality of Metlan
We consistently implement our corporate philosophy:Stabilization is the absolute principle,all stability of personnel and raw materials formed to keep the stability of products while leaving factory.After long-term continuous improvement,we are keenly aware of your demand.Each of Metlan products has been strictly checked and t ested to completely rule out your worries in future.
Order table
| Type | Specification code | Illustration | ||||||||||||||||||
| MT3000W | —————————— | Microdifferential pressure transmitter | ||||||||||||||||||
| Accuracy degree |
3—————————— 0—————————— |
±0.1% ±0.075% |
||||||||||||||||||
| Output signal | 5—————————— | 4-20mA, HART Protocol communication | ||||||||||||||||||
| Transducer | 1—————————— | Capacitable sensor | ||||||||||||||||||
| W—————————— | ||||||||||||||||||||
| Measuring manner |
-Y—————————— -C—————————— |
Micro pressure type Micro differential pressure type |
||||||||||||||||||
| Measuring range | 2—————————— | 0-0.125~1.5kPa(0-12.5~150mmH2O) | ||||||||||||||||||
| Connection medium Part material |
2—————————— 3—————————— 4—————————— 5—————————— 3—————————— 5—————————— 4—————————— |
|
||||||||||||||||||
| Display header |
D—————————— N—————————— |
Multiple parameters and ways digital LED display header No display header | ||||||||||||||||||
| Installation manner and vent/drain Valve |
A—————————— B—————————— C—————————— D—————————— N—————————— 1—————————— 2—————————— 3—————————— |
Tube-installation bend support Plat-installation bend support Tube-installation level support L-support No-support Up the lateral vent/drain valve Up the lateral vent/drain valve Rear vent/drain valve |
||||||||||||||||||
| Additional type |
M—————————— C—————————— -NF1————————— -NS1————————— -Q—————————— |
M20*1.5 thread electronic interface with waterproof concentrator. NPT1/2 impulse interface and impulse pipe. Ex-proof security certification: Exd II CT6 Intrinsic safety Certificate: Exi II CT4 Other conventions are available |
