Impact Tester NOVOTEST STRIKE-U6272
The device is designed for determining the strength of paint films (coatings) under impact 1 kg load or other loads.
The design of the device STRIKE-U6272 is made in accordance with modern requirements of ISO 6272-2002.
The device is used in factory laboratories for coatings testing during manufacturing processes, as well as in field conditions during maintenance work.
The instrument is used for testing coatings on metals, plastics, flooring, wood paneling, ceramic, glass, concrete, screed samples.
The device measures the maximum height, in free fall with a certain mass of the load does not cause visible mechanical damage on the surface of the tested plate with a lacquer coating. The strength of coatings at impact is expressed by the value of the maximum height in centimeters at which the firing pin with a load of 1 kg falls freely to the surface being tested in accordance with ISO
Advantages:
Device has several versions, which are correspond to different standards.
Also instrument has the simple and very reliable design.
Specifications:
Operating
Operating method
The tests can be performed in two ways:
By principle destroyed / not destroyed, when the test is performed at set up height and a certain weight of sinker (test coating for compliance with the specific requirements)
Test for define the minimum drop height with a gradual increasing the height of the falling and the minimum weight of sinker at which the coating was cracked or exfoliated from the painted surface
Testing
Install the required sinker at the desired height. If necessary, use required restrictors to limit the depth of the indentation. Put the tested plate outside (direct hit) or inside (back side hit) on the anvil cover. Holding the tested plate at this position by a presser coupling. Release the sinker and allows it to fall on the tested plate, which is lying on the anvil. After that inspect the coating with the magnifying glass.
General specifications of the Impact Tester NOVOTEST STRIKE-U6272
| Weight of load, kg | 1 ± 0,001 |
| The length scale of the device, mm | 1000 |
| The scale interval | 10 mm ± 0,5 |
| Diameter of drummer (ISO 6272), mm | 12.7 |
| Diameter of drummer (ISO 6272), mm | 20 |
| Diameter of drummer (ISO 6272, ASTM D 2794), mm | 15,9 |
| The hole diameter of the anvil (ISO 6272), mm | 16,3 |
| The hole diameter of the anvil (ISO 6272), mm | 27 |
| The hole diameter of the anvil (ASTM D 2794), mm | 16,3 |
Extended specifications of the Impact Tester NOVOTEST STRIKE-U6272
| Specifications of U1-4765-0,5m | |
| Weight of load, kg | 1 ± 0,001 |
| The length scale of the device | 500 mm |
| Scale interval | 10 mm ± 0,5 |
| The diameter of the working part of the anvil | 30 mm |
| The hole diameter of the anvil | 15 mm |
| Bead diameter | 8 mm |
| Specifications of U1-4765-1m | |
| Weight of load, kg | 1 ± 0,001 or 2 ± 0,002 |
| The length scale of the device | 1000 mm |
| Scale interval | 10 mm ± 0,5 |
| The diameter of the working part of the anvil | 30 mm |
| The hole diameter of the anvil | 15 mm |
| Bead diameter | 8 mm |
| Specifications of U1-53007 | |
| Weight of load, kg | 1 ± 0,001 |
| The length scale of the device | 1000 mm |
| Scale interval | 10 mm ± 0,5 |
| Bead diameter (ISO 6272) | 12.7 mm |
| Bead diameter (ISO 6272) | 20 mm |
| Bead diameter (ISO 6272, ASTM D 2794) | 15.9 mm |
| The hole diameter of the anvil (ISO 6272) | 16.3 mm |
| The hole diameter of the anvil (ISO 6272) | 27 mm |
| The hole diameter of the anvil (ASTM D 2794) | 16.3 mm |
| The depth of penetration of the striker into the coating is according to ISO 6272 and regulated by the set of constraints | from 2 to 10 mm |
| Specifications of U1-51164-0,5m | |
| Weight of load, kg | 3 ± 0,001 kg, or any other by request |
| The length scale of the device | 500 mm |
| Scale interval | 10 mm ± 0,5 |
| Bead diameter | 16 mm |
| The device is used to test the protective coatings of pipes with defined strength at impacting in the laboratory or directly on the pipes. | |
| Specifications of U1-51164-1m | |
| Weight of load, kg | 3 ± 0,001 kg, or any other by request |
| The length scale of the device | 1000 mm |
| Scale interval | 10 mm ± 0,5 |
| Bead diameter | 16 mm |
| Specifications of U1-4219-0,5m | |
| Weight of load, kg | 3 kg |
| The length scale of the device | 500 mm |
| Scale interval | 10 mm ± 0,5 |
| Bead diameter | 16 mm |
| Specifications of U1-4219-1m | |
| Weight of load, kg | 3 kg |
| The length scale of the device | 1000 mm |
| Scale interval | 10 mm ± 0,5 |
| Bead diameter | 16 mm |
Standard set includes:
Device with sinker 1000g
Drummer and anvil (customer's choice)
Operating manual
Package
More information on our website by link - novotest.biz .
For any questions, please contact us by email: sales1 @ novotest.biz .
