Pipe V Grooving Machine Foot Pedal Notching 6100mm Long Workpiece
Introduction:
This equipment is fully CNC V Groover Machine for metal sheet. It adopts
advanced CNC system and innovative design with the advantages
of high processing precision, simple operation, no noise, no vibration and so on.
It is widely used in the sheet metal V-groove, U-groove
and other irregular groove processing (including stainless steel, aluminum,
aluminum plate, copper, iron, plastic, wood, acrylic panels and
other special plates.). Particularly, it is applicable to the V-groove processing
of sheet metal before bending .
Describe:
This V cutter machine composed of bed, beam, tool rest, cnc system, pneumatic
material hold-down unit, compressed air blowing and cooling system. It is a gantry
type grooving machine.
The bed and beam is box-type structure. Steel welded structure, tempering aging
to eliminate stress. Good rigidity and accuracy.
Tool rest action of moving forward and backward(Y1 axis), up and down(Z axis),
and forward and backward on hold-down(Y2 axis) are all controlled by cnc system.
AC Servo drive, ball screw transmission, with high accuracy and location accuracy.
Left and right moving of beam(X axis) use ac frequency conversion motor drive,
transmission motion with gear and rack, with high speed, strong loading capacity.
The pneumatic hold-down system ensure good machining precision and repeat
accuracy, which can automatically adapt different sheet thickness
Rear Feeding Device:
CNC Control System H4C:
Carrier Of Blades:
Worktable And Pneumatic Hold Down:
Electrical System:
Technical Data:
| Item | 1250/6000 | 1250/5000 |
| Cutting length | 6000mm | 5000mm |
| Cutting width | 1250mm | 1220mm |
| Sheet thickness | 0.6-4mm | 0.6-4mm |
| Max. Cutting speed | 0-1000mm/sec | 0-1000mm/sec |
| Max. X Dolly return speed | 0-1000mm/sec | 0-1000mm/sec |
| Y axis moving speed | 20 m/min | 20 m/min |
| Z axis moving speed | 20 m/min | 20 m/min |
| X axis control | AC frequency driver control, Brand Delta |
AC frequency driver control, Brand Delta |
| Y,Z axis control | Servo driver control, Brand Delta |
Servo driver control, Brand Delta |
| Linear guide & ball screw | Taiwan HIWIN | Taiwan HIWIN |
| Bearing | SKF | SKF |
| X axis motor power | 4KW | 4KW |
| Y/Z axis motor power | 1.5/ 1.0 KW | 1.5/ 1.0 KW |
| Control system | Siemens PLC | Siemens PLC |
| Cable |
Main Cable : Germany IGUS |
Main Cable : Germany IGUS |
| Max cutting step | 15 cycle | 15 cycle |
| Machine dimension | 7600x2350x1550(mm) | 66200x2350x1550(mm) |
| Machine weight | 10600kg | 9300kg |
Enclosed Accessory:
- backup plate 12 pieces
- allen wrench 1 set
- screw some pieces
- high speed steel 3 sets
- alloy blade holder 5sets
- alloy inserter 12 pieces
- feeler blcok 1 set
- oil gun 1 piece
- Foot pedal 1 piece
Machine picture:
