GD-0615 Asphalt Wax Content Tester
Introduction:
l This instrument is designed and made as per standards T 0615-2011 Wax Content Test for Bitumen by distillation in JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering and SH/T0425 Standard Test Method for Wax Content Test of Bitumen.
l It is used to determine the wax content in the petroleum asphalts by cracking distillation.
I. Features
l This instrument adopts method of distillation cooling to determine the wax content of sample. The instrument has two parts: Upper part contains stirring motor, temperature sensor, air flow distributor and hook for sample vessel. Lower part is the cooling filter.
l The special designed air flow distributor and hook for sample vessel make the instrument more reasonable and convenient for use.
l The constant temperature bath adopts glass material. It has good heat preservation. There is no mist on the observation window. Convenient to observe.
l This instrument equips a high accuracy digital temperature controller with clear temperature show and simple temperature set.
l This instrument is floor-type structure. It can determine 3 samples at the same time. The test efficiency is high.
II. Specifications
Power supply | AC(220±10%)V,50Hz |
Heating power | 700W |
Cooling power | 1000W |
Stirring rate of motor | 1200 r/min |
Temperature sensor | Pt100 |
Refrigeration medium | F22 |
Temperature accuracy | ±0.1℃ |
Working environment | -30℃～40℃, RH＜85 |
Total power consumption | ≤1800W |
Overall dimension | 620mm×500mm×1600mm (The air flow distributor is included)
|
III. Optional accessories
Vacuum pump | Model 2XZ-2L/S(Recommend) |
Vacuum drying oven | Model DZF-6020(Recommend) |
Burning furnace | Model GD-0615-1 Cracking furnace(Recommend) |
Balance | 0.1mg ,0.1g one set for each |
