16 CORES outdoor fibre optic splice box , termination box fiber with Wall mount / Pole mount
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building.
. Features
- Total enclosed structure.
- Material: PC,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP68.
- Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
- Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC adaptor installation, easy maintenance.
- Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
- Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
. Application
- idely used in FTTH access network.
- Telecommunication Networks
- CATV Networks
- Data communications Networks
- Local Area Networks
III Specification
1,Environmental requirement
Working temperature:-40+85
Relative humidity:≤85%(+30)
Atmospheric pressure:70KPa106Kpa
2,Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:1000 times
3,Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than2MΩ/500V(DC)
IR≥2MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover
U≥3000V
4,Configuration table:
| Model | Capacity | Size |
| 3C-FDB0216 | 16 port | 260mm(W)x320mm(D)x90mm(D) |
| Model | N.W (kg/pcs) | Dimension of outer carton (mm) | G.W of outer Carton (kg/carton) | No of Products (pcs/carton) |
| 3C-FDB0216 | 1.85 | 550*355*620 | 16.1 | 10 |
5,Product cable ways:
5.1. Insert Input cable and fix it.
5.2Connect input cable with splitter input cable by fusion splicing.
5.3. Cable routing, storage
5.4 Fix the arranged output pigtails with spiral tube to tray.
5.5 Connect splitter output pigtails with drop cable by fast connector
5.6.Close the cover, and mount the termianl on the wall or pole.
1X16 PLC SPLITTER TERMINAL
IP 68
UV RESISTANCE
