Industry fiber optic cable media converter,fibre ethernet converter FX Link/Act Power
Features
High Performance Network Switching Technology
10/100/1000BaseT(X) auto-negotiation and auto-MDI/MDI-X supported available. with SFP Slots
Industrial-grade Reliability
Link Fault Pass-Through (LFP)
Power failure, port break alarm by relay output
Industrial Rugged Design
Regular (-20 to 70°C) and extended (-40 to 85°C) operating
temperature models available
Long-haul transmit distance of 40 km or 80 km
Designed for hazardous locations (Class 1 Div. 2/Zone 2)
Power supply
12VDC to 36VDC
Introduction
3CI-SFP0101GSeries industrial media converters provide industrial grade media conversion between 10/100/1000BaseT(X) and 100BaseFX.
3CI-SFP0101G’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each 3CI-SFP0101G converter comes with a relay output warning alarm to help prevent damage and loss.
3CI-SFP0101Gmedia converters are designed for harsh industrial environments, such as in hazardous locations (Class 1 Division 2/Zone 2, DNV, and GL Certification), and comply with FCC, TV, UL, and CE standards.
The 3CI-SFP0101Gseries is available in models that support an operating temperature of -20 to 70C, and an extended operating temperature of -40 to 85C. All 3CI-SFP0101Gseries are subjected to a 100% burn-in test.
Specifications
Interface
RJ45 ports: 10/100/1000BaseT(X)
Fiber ports: 1000Base-FX( SFP type, LC /SC)
LED Indicators: TP Act, Fdx, 100, 1000, FX Link/Act, Power
Alarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC
Optical Fiber
Distance:
Multi mode: 0 to 2 km, 1310 nm (50/125 μm, 800 MHz*km)
0 to 2km, 1310 nm (62.5/125 μm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))
Min. TX Output:
Multi mode : -12 dBm
Single mode: 0 to 40 km, -5 dBm
0 to 80 km, -3 dBm
Max. TX Output:
Multi mode: -8 dBm
Single mode: 0 to 40 km, 0 dBm
0 to 80 km, 0 dBm
RX Sensitivity: -24 to -20 (Multi), -32 to -30 (Single)
Special Mechanical for Harsh Environments
3c-Link designed the converters especially for applications in harsh environment and required to work non-stop. The quality of industrial converter is constantly being tested by rugged conditions, such as high or low temperature conditions, impact, vibration, or corrosion. To cope with demanding industrial environments, the metal case is rigid, shock-proof, and conforms to IP30 design. The compact design with DIN Rail and Wall mount options to adjust any type of installation requirements.
Auto Baud Rate Detection
3c-Link Media Converters are equipped with the capability to automatically detect the baud rate for the serial interfaces, thus making no more manual settings and hassle free installation. Moreover, no need to worry if needs to change any serial device, which works on different baud rate than the earlier one.
Application
Serial to fiber media conversion is the key requirement for users who need to extend the Ethernet Signals transmission distance and increase networking capability. The fiber converters can extends
the communication distance up to 80KM and at the same time providing the best solution for an immune, insulated, reliable, and maintainable transmission media.
