SC UPC single mode optical fibre connectors Fiber Embeded
FAST CONNECTOR
Field Installable Connector
Features:
Prestubbed, factorypolished ferrule
No epoxy required
Precision mechanical alignment insures low loss
Fiber can be reseated
VFI can be used to confirm fiber is installed properly
Applications:
Premise environments
Patch panels
Direct equipment termination
Fiber to the Subscriber (FTTx) applications
Repair and replacement requirements
Equipment test leads
FAST Connectors are factory pre polished, field installable connectors that completely eliminate the need for hand
polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory precleaved
fiber stub and a proprietary indexmatching gel combine to offer an immediate low loss termination to either
singlemode or multimode optical fibers.
FAST Connectors are compatible with 2m, 3mm, and 2.0*3.0mm cordage. Each connector is color coded per
industrystandard requirements to aide in identification during and after installation.
SC Connector (Fiber Pre Embedded#Snap Boot)
SIZE: 56*9*7mm
Compatible with 2.0*3.0mm flat cable
SC Connector (Fiber Pre Embedded#Screwtype Boot)
SIZE: 53*9.5*9.5mm
Compatible with 2.0*3.0mm flat cable or 2.0~3.0mm
round cable
SC Connector (Mini#Fiber Pre Embedded#Snap Boot)
SIZE: 49.5*7*6mm
Compatible with 2.0*3.0mm flat cable
SC Connector (Mini#Fiber Pre Embedded#Screwtype
Boot)
SIZE: 53*7*6mm
Compatible with 2.0*3.0mm flat cable or 2.0~3.0mm
round cable
SC Connector (Mini#Fiber Pre Embedded#Screwtype
Boot)
SIZE: 53*7*6mm
Compatible with 2.0*3.0mm flat cable or 2.0~3.0mm
round cable
SC Connector (Mini Angle Type #Fiber Pre
Embedded#Snap Boot)
SIZE: 40*23*7mm
Compatible with 2.0*3.0mm flat cable or 2.0~3.0mm
round cable
| Item | Parameter |
| Cable Scope | 3.0 x 2.0 mm flat Cable |
| Fiber Diameter | 125μm ( 652 & 657 ) |
| Coating Diameter | 250μm |
| Mode | SM |
| Operation Time | about 15s(exclude fiber presetting) |
| Insertion Loss | ≤ 0.3dB(1310nm & 1550nm) |
| Return Loss | ≤ -45dB |
| Success Rate | >98% |
| Reusable Times | >10 times |
| Tensile Strength | >5 N |
| Tighten Strength of Coating | >10 N |
| Temperature | -40+85 |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
| Mechanical Durability(500 times) | IL ≤ 0.3dB |
| Drop Test(4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
