Intelligent Control Automatic Chemical Dosing Systems bactericide dosing system
Description
1. Intelligent control systems to the online instrument measured water quality data with a preset standard values continue to compare, if the measured data with the preset value deviation, then open the dosing dosing pump, water quality indicators to be restored normal after dosing pump shut down to stop dosing.
Intelligent automatic dosing advantages: Avoid artificial dosing, accurate uniform dosing in a timely manner without lag.
2. Online instrumentation dosing system with timely detection of water quality indicators directly reflect the water quality is conducive to maintenance personnel to grasp the dynamics of water quality.
3. When the conductivity is lower than the lower limit set value, intelligent control cabinet control dosing pump dosing until the conductivity setpoint limit on recovery, intelligent control cabinet control dosing pump to stop dosing.
4. Product performance and stability, uniform and accurate dosing, the dosage and the output pressure can be adjusted according to the actual needs.
5. The dosing bucket of water treatment chemicals for the container, round, PE anti-aging material, will not become brittle rupture life of more than 10 years. Designed for automatic dosing design, rigid full, even if it does not produce distortion at full load, translucent material is easy to observe from the outside barrel Pharmacy margin. Cover the pot high rigidity so that it can provide sufficient supporting and location to install the dosing pump and low level alarm devices.
6. Circulating water systems are used in municipal tap water, after which there is a substantially fixed default value of the conductivity, will continue concentrated by evaporation in a circulating water system is running, the value will continue to increase the conductivity, the high conductivity of the cycle water system is dangerous. Conductivity can be used to reflect the degree of evaporation concentrated circulating water system, circulating water conductivity value after running the conductivity divided by the municipal water supplier that is worth to the concentration factor. Therefore, effective control of the conductivity of the circulating water system is very important.
