Technology parameter
Filling heads | 2 |
Filling capacity | 100-300BPH(according to operation proficiency) |
Filling method | Isobaric manual filling |
Beer connector diameter | DN20 |
CO2 connector diameter | ∮8 |
Outsize | 550mm*550mm*1350mm(L*W*H) |
Equipment installation and commissioning
1.Firstly install the beer filler on the filling site. It is better to be closer to the draft beer buffer tank.
2.Adjust the four footing screws of the filler until it does not shake and be steady.
3.Connect beer inlet pipe. The filler beer inlet pipe mouth is DN20 flexible pipe connector, the same as buffer tank beer outlet pipe mouth. This two pipe mouth can be connected by pressure hose (the internal diameter of the flexible pipe is 62.5px). After insert the flexible pipe, tighten it by steel wire clamp.
