Dynamic Weighing Single Point Load Cell / Checkweigher Load Cell
- Double bending beam load cell with Beryllium-Copper measuring element:
- Outstanding linearity and hysteresis
- High resistance at fatigue and shock
- Viscous damping specially for use in dynamic weighing applications:
- Faster settling time
- Higher weighing speeds
- Increase load cell life
- Stainless-Steel housing
- Protected against humidity IP 65 (EN 60529)
- Single point load cell, for off-center loads
- Integrated on-center overload protection
- 6 wire (sense) electrical connection
| SPECIFICATIONS | ||
| Nominal capacities (Ln) |
2-3-5-7.5-10 15-20-30 |
kg |
| Accuracy class | 0.05 | % |
| Minimum dead load | 0 | %Ln |
| Service load | 150 | %Ln (1) |
| Safe load limit | 200 | %Ln (1) |
| Total error | < ±0.05 | %Sn (2) |
| Repeatability error | < ±0.015 | %Sn |
|
Temperature effect: on zero on sensitivity |
< ±0.04 < ±0.02 |
%Sn/5°K %Sn/5°K |
| Creep error (30 minutes) | < ±0.035 | %Sn |
| Temperature compensation | 0...+40 | °C |
| Temperature limits | -20...+50 | °C |
| Nominal sensitivity (Sn) | 2 ±10% | mV/V |
| Nominal input voltage | 10 | V |
| Maximum input voltage | 15 | V |
| Input impedance | 400 ±20 | Ω |
| Output impedance | 350 ±3 | Ω |
| No load output | < ±2 | %Sn |
| Insulation resistance | > 5000 | MΩ |
| Maximum deection (at Ln) | 0.2-0.4 | mm |
