Parking Lot Access Control Parking Barrier Gate With CE Approved

Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews

Remote Control CE Approved Parking Barrier Gate For Access Control System

 

 

Features

 

1) The humanized clutch device:in case of power off, unlock the clutch device and raise the boom manufally. By the time the power is supplied, lick the clutch device to make it working normally again.

2) Special spring device:Both the compression spring and tension spring can be used in the machine, Using the compression sprin can avoid accidents caused by the tension spring.

3) Three control buttons:for boom raising, falling and pausing.

4) Boom backtrack function:the boom will rise if hits something when falling.

5) Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed.

6) Both external and internal loop detectors are supported.

7) "open","close" and "stop" controlling interfaces.

8) RS-485 communication serial interface(optional)

9) Traffic light signal connection device: red light for stop,green light for pass.

10) Remote control and wire control for selection.

 


Specifications

 

Material Cold roll plate,galvanized plate or stainless steel
Housing size 320*280*935
Protection degree IP54
Power 120w
Voltage 220V ± 10%, 110V ± 10%
Relative humidity <90% coagulation free
Remote control distance >30m
Working temperature -45°C to 75°C
Motor rotational speed 1400rmp
Max boom length 8m
MCBF  ≥5, 000, 000 times
Net weight 60kg
Related accessories Infrared sensor,loop detector,traffic light,UFH reader
Applications Parking Lots, Toll Gates, Goods Yards, Railway Crossings
Applications Commercial Premises, Aparment Block

 

 

Communication with customers
 
1)     Q: Connected power and press open/close button but traffic barrier gate no action?

 

A

Reason

Solution

1

Fuse blown

Check fuse and power in controller

2

Battery of remote control powered off

Change a new one

3

External protection circuit break or at protecting status

Open the barrier door and click OPEN/CLOSE button on control box

4

Same frequency interference

Check photocell and loop detector

 
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?

 

A

Reason

Solution

1

Limit switch

Adjust the horizontal/vertical limit switch to correct position

2

Main controller failure

Change a new one

 
3)   Q: Motor running but traffic barrier gate arm no action?

 

A

Reason

Solution

1

Barrier arm at 45° position where is hard to move

Unlock clutch and manually rotate arm to horizontal or vertical position then try again

Send message to this supplier
Mr. Miss. 84536531
Tel: 86-755-84536531
Enter between 20 to 3,000 chatacters.
Contact Method
Shenzhen Wonsun Machinery Electrical Technology Co. Ltd
LonggangShenzhenCity, Shenzhen, Guangdong, China (Mainland)
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!