Pixel Pitch 10mm Outdoor Led Displays With Full Color SMD3535 High Brightness
Quick detail
1. Waterproof and it's suitable for outdoor runing message signs
2. Standard cabinet 960*960mm
3. Constant current 1/4 scan
4. 2 years' warranty for entire screen.
5. technical support on upgrades and replacement.
Outdoor SMD Features:
1. Outdoor SMD triple LED high-definition display technology enables a broader range of vision.
2. Use more reliable integrated packaging technology.
3. vivid color performance, full-screen color and brightness, to achieve a high degree of consistency.
4. Ultra-thin, the entire cabinet does not exceed 90 mm.
5. The aluminum body, light weight, only 37 kg per square meter, real thin, lightweight box.
6. The unique mechanical structure design, easy accessibility, a person is able to dismantle the entire screen.
7. The horizontal and vertical viewing angles up to 140 degrees.
8. The focus on high-brightness SMD outdoor LED display solutions, protection class IP 65, brightness up to 6500cd / m.
Specifications
| Item P10 | |||
| Main parameters | Technical parameters | UNIT | parameters values |
|
Module Parameters |
Pixel pitch | MM | 10 |
| Panel size | MM | L320*H160 | |
| Physical density | / | 10000Dots | |
| Pixel Configuration | R/G/B | 1,1,1 | |
| Driving method | Constan current 1/4scan | ||
| LED Encapsulotion | SMD | 3535 | |
| Display resulotion | Dots | 32*16 | |
| Moduel Power | W | 35 | |
|
Display Parameters |
Viewing Angle | Deg | H120V120 |
| Option Distance | M | 6-70 | |
| Maximum Power | W | 850 | |
| Cabinet Size | MM | L960*H960 | |
| Frame Frequency | Hz | ≥60 | |
| Refresh Frequency | Hz | ≥1200 | |
| Equilibrium Brightness | CD | ≥5500 | |
| Operation Temperatuer /Humidity |
-30~+45/ 10%~95% |
||
| Input Voltage | VAC | 220V±10%/110V±10% | |
| Ingress Protection | Front:IP67;Back:IP65 | ||
| Gray Scale/Color | ≥16.7M color | ||
| Brightness Contral | Manual/Automatic | ||
| Input Signal | RF/S-Video/RFB/etc | ||
| Contral Systerm | PCTV+DVI video card+control card+fiber |
||
| MTBF | HOURS | >5000 | |
| Life Time | HOURS | >100,000 | |
| Lamp Failure Frequency | <0.0001 |
||
Notice
1, Switching sequence: When the opening screen: first boot, the opening screen. When off-screen: first off screen, after shutdown(First turn off the computer does not display, the screen will cause high body appeared bright spots, led lamp burning, serious consequences.)
2, A switch screen interval time is greater than five minutes.
3, The computer control software into the project before the opening screen is energized.
4, Avoid all white screen state opening screen, this time because of the impact of the current system maximum.
5, To avoid out of control in the opening screen, the system at this time because of the impact of the current maximum.
A computer does not enter the control software program;
B computer is not powered;
C control part is not powered.
6, The ambient temperature is too high or heat is not good conditions, LED lighting should be careful not to open the screen for a long time.
7, Electronic display body part appears very bright line, should pay attention to timely off-screen, in this state for too long opening screen.
8, Often display the power switch trip, should be checked in the screen body or replace the power switch.
9, Regular inspection at the firm conditions attached. If loosening, pay attention to timely adjust, re-strengthening or updating hanging pieces.
10. The large-screen display screen body, the control section the environment, avoid insect bites, when necessary, place the anti-rat poison.
Aging test
Wooden case packaging
