24KV Power Station Composite Polymer Line Post Insulator with Rated Mechanical Tension Load 8KN
Characteristics:
his kind of product is applied to power station facilities, and has features of good water repellence, anti-ageing, resistance to tracking and erosion has high tensile strength and bending strength, high shock resistance, good shock and brittle fracture prevention, light weight, easy to install, and the installation dimensions of top and base are the same with those of porcelain post type, they can be exchanged to use each other.
1. station post insulator is used on substations, and some other post insulator is used on electrical apparatus, such as switch, switchgear.
2.Line post insulator and pin post insulator can only reach 132KV voltage, but station post insulator, no matter composite type or porcelain type, can be used on any voltage until 800KV.
3.Electrical post insulator with end fittings at two ends, cap or flange, but line post insulator only with cap, and the other end can be tie top porcelain head or clamps.
4.Station post insulator can be used stack assembled with other stack, but line post insulator can't.
Specifications:
Spec&Type | Rated Voltage (KV) |
Rated Mechanical Tensionload (KN) |
Rated Reverse Load (KNM)
|
Strcucture Height (mm) | Min Normal Creepage Distance (mm) | Full Wave Lightning Impulse Withstand Voltage (KV) | 1Min Power Frequency wet Withstand Voltage |
FZSW-24/8 | 24 | 8 | 1.2 | 380 | 680 | 170 | 65 |
Material:
1. Silicon rubber, composite polymer
2. Glass-fiber reinforced epoxy resin rod
3. Hot-dip galvanized steel