High Speed Rain Down Pipe Roll Forming Machine with PLC
Control 0.4 - 0.8mm Thickness
Main Features
1. Guarantee/Warranty: 1 years
2. Price: Realible price with high quality.
3. Machine feature: Low break down rates, with long life.
4. Prompt delivery: Short delivery time.
5. Quality : High quality with CE/ISO approval.
6. Service: Good after service to guarantee you use the machine normally and sell your products well.
7. Experience:with more than 15 years professional experience
Main Components of Roll Forming Machines
- de-coiler
- material feeding device
- roll forming machine
- straightening device
- saw cutting equipment
- runout table(2 units)
Main parameters of the Roll Forming Machine
| Coil material | PPGI |
| Coil thickness | 0.4 - 0.8mm |
| Forming roller stations | about 20 stations(depend on profiles) |
| Forming speed | 8 - 12m/min |
| Shaft diameter | φ70mm |
| Roller material | 45#steel, Quenching, hardness HRC56-62º |
| Voltage | 380v,50hz,3phase or as your requirement |
| Main motor power | 7.5kw |
| Saw cutting power | 3KW |
| Capacity Length | as your requirements |
| Material of shaft | 40Cr,tempering treatment |
| Material of cutter | Cr12Mov,quench treatment |
| Cutting mode | Tracing cutting system with round saw or hydraulic cutter is optional. |
| Control system | Panasonic PLC with touch screen |
| Transmission | by 1 inch chain driven |
| Total Gross Weight: | About 8000kgs |
| Line size (Lx w x h) | 11000 mm×1500 mm×1500 mm(depend on profiles) |
