Automatic 3D Coordinate Measuring Machine Axis Movement Controlling Joystick
Introduction
1. Designed based on the vision measurement machine and coordinates measurement machine application.
2. Using the non-contact Hall joystick, long life cycle, small range of no-signal area.
3. Using rubber buffering press buttons, reliable and stable.
4. Including 4 magnet and 4 rubber pad at the bottom.
5. All the buttons with switching function is with LED indicator.
6. The emergency stop is with independent wiring, easy for the system wiring.
7. Including 4 “8” type Nixie tube display, the display content is up to the host computer.
8. Using RS232 communication interface, driver is not required and there is no limitation of the operation system.
9. DLL (Dynamic Link Library) is offered, able to be used on VB, VC, C#, labview or BCB etc.
Specification
| Item | Value | Unit |
| Working voltage | 12 | DCV |
| Working current | 100 | mA |
| Port rate | 115200 | bps |
| Cable length | 3 | M |
| Dimension | 220*104*99 | mm |
| Press button | 15 | pc |
| Indicators | 16 | pc |
| Nixie tube | 4 | pc |
| Joystick life cycle | >3 million | Times |
| Press button life cycle | >2 million | Times |
