We are professional 1.2888 X20CoCrWMo10-9 Forged Forging Steel Magnesium Copper Brass zinc Aluminum Extrusion Presses Extrusion Dies from china
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
0.20 | 0.25 | 0.50 | 9.50 | 2.0 | - | - | 5.50 | Co: 10.0 |
Description
Special high alloy hor work steel. Extreme retention of hardness; suitable for all applications where particular resistance to high temperature wear and melt of of metal is required.
Applications
Extrusion tools for copper, copper alloys and steel, including spcial dies, die casting tools of all kind for brass, goosenecks and chambers for magnesium die casting, ectrusion tools for steel. No water cooling.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 215
Density [g/cm3]: 8.08
Soft Annealing
Heat to 760-840oC, cool slowly in furnace. Time is 4-6 hours. This will produce a maximum Brinell hardness of 320.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 600-650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 1100-1150oC followed by air, oil quenching or vacuum quenching. Hardness after quenching is about 52 HRC.
Tempering
Tempering temperature: 600-750oC, to increase hardness,
Forging & Heat Treatment Equipment List
Name & Description
Forging Handling Capacities
Quantity
3150 Tons Free Forging Hydraulic Press
Max. Single Forging in 28 Tons
1
5000mm Diameter Rolling Forging Machine
Max. Single Forging in 16 Tons
1
8 Tons Free Forging Hummer
Max. Single Forging in 7.5 Tons
1
6 Tons Free Forging Hummer
Max. Single Forging in 5.5 Tons
1
5 Tons Free Forging Hummer
Max. Single Forging in 4.5 Tons
1
60 Tons Forging Handling Operator
Max. Single Forging in 45 Tons
1
10 Tons Forging Handling Operator
Max. Single Forging in 7.5 Tons
1
80 Tons Crane
Max. Single Ingot in 80 Tons
1
60/30 Tons Crane
Max. Single Ingot in 60 Tons
1
30/10 Tons Crane
30/10 Tons
4
Trolley Heat Furnace
5000*1500*1200 mm
3
Trolley Heat Furnace
8000*2000*1600 mm
3
Trolley Heat Furnace
6500*1500*1200 mm
3
Vertical Heat Furnace
Ø2500*10000 mm
2
Total Forging Equipment Quantity
24