5mm Round Diffused Indicator LED Warm White light emitted diode
- Features:
- Popular T-1 3/4 diameter package .
- Viewing angle=30°.
- Reliable and robust.
- Emission color: X=0.30, y=0.31.
- Industrial standard footprint.
- The product itself will remain within RoHS compliant version.
- Descriptions:
- The series is specially designed for applications requiring higher brightness.
- The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in white emission.
- Utilizing advanced InGaN chip technology.
- Applications:
- QA equipment.
- Backlighting of LCD.
- Automotive equipment.
- Replacement of conventional Light bulbs and fluorescent lamps.
- Indoor and out door displays, etc.
Part No. | Chip Material | Lens Color | Source Color |
DL-504WC80A-2W30 | GaAlAs | White | White |
- Package Dimension:
Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
- Protruded resin under flange is 1.00 mm (.039″) max.
- Specifications are subject to change without notice.
- Absolute Maximum Ratings at Ta=25
Parameters | Symbol | Max. | Unit |
Power Dissipation | PD | 95 | mW |
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
Forward Current | IF | 25 | mA |
Reverse Voltage | VR | 5 | V |
Operating Temperature Range | Topr | -40 to +80 | |
Storage Temperature Range | Tstg | -40 to +85 | |
Lead Soldering Temperature [4mm (.157″) From Body] |
Tsld | 260 for 5 Seconds |
Notes:
- Proper current derating must be observed to maintain junction temperature below the maximum.
- LEDs are not designed to be driven in reserve bias.
Electrical Optical Characteristics at Ta=25
Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
Luminous Intensity | IV | 15000 | 20000 | --- | mcd | IF=20mA (Note 1) |
Viewing Angle | 2θ1/2 | --- | 30 | --- | Deg | IF=20mA (Note 2) |
Chromaticity Coordinates | x | --- | 0.30 | --- | IF=20mA (Note 3) | |
y | --- | 0.31 | --- | |||
Forward Voltage | VF | 3.00 | 3.30 | 4.00 | V | IF=20mA |
Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- It use many parameters that correspond to the CIE 1931 2°. X, Y, and Z are CIE 1931 2° values of Red, Green and Blue content of the measurement.
- Typical Electrical / Optical Characteristics Curves
(25 Ambient Temperature Unless Otherwise Noted)
- Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%. LTPD: 10%.
1) Test Items and Results:
Test Item | Standard Test Method | Test Conditions | Note | Number of Damaged |
Resistance to Soldering Heat |
JEITA ED-4701 300 302 |
Tsld=260±5, 10sec 3mm from the base of the epoxy bulb | 1 time | 0/100 |
Solder ability |
JEITA ED-4701 300 303 |
Tsld=235±5, 5sec (using flux) |
1time over 95% |
0/100 |
Thermal Shock |
JEITA ED-4701 300 307 |
0~100 15sec, 15sec | 100 cycles | 0/100 |
Temperature Cycle |
JEITA ED-4701 100 105 |
-40~25~100~25 30min,5min,30min,5min | 100 cycles | 0/100 |
Moisture Resistance Cycle |
JEITA ED-4701 200 203 |
25~65~-10 90%RH 24hrs/1cycle | 10 cycles | 0/100 |
High Temperature Storage |
JEITA ED-4701
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|