SMD Size 4.8x3.6mm LED Light Components Round Subminiature Package high power infrared led Chip
Infrared LED Light Components
Features:
- Package in 12mm tape on 7" diameter reels.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- High reliability.
- Low forward voltage.
- Mono-color type.
- The product itself will remain within RoHS compliant version.
Descriptions:
- The device is an infrared emitting diode in miniature 4836SMD package which is molded in water clear plastic.
- The device is much smaller than leaded components. Thus enable smaller board size. Higher packing density. Reduced storage space and finally smaller equipment to be obtained.
- The device is specially matched with photodiode, phototransistor and infrared receiver module.
Applications:
- PCB mounted infrared sensor.
- Infrared emitting for miniature light barrier.
- Floppy disk drive.
- Optoelectronic switch.
- Smoke detector.
Part No. | Chip Material | Lens Color | Source Color |
DL-PCB4836SIRC-2SIR60 | GaAlAs | White Diffused | Infrared |
Absolute Maximum Ratings at Ta=25
Parameters | Symbol | Max. | Unit |
Power Dissipation | PD | 200 | mW |
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 1.0 | A |
Continuous Forward Current | IF | 150 | mA |
Reverse Voltage | VR | 5 | V |
Operating Temperature Range | Topr | -40 to +80 | |
Storage Temperature Range | Tstg | -40 to +85 | |
Soldering Temperature | Tsld | 260 for 5 Seconds |
Electrical Optical Characteristics at Ta=25
Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
Radiant Intensity (Note 1) * | Ee | 8 | 15 | --- | mW/sr | IF=100mA |
Viewing Angle (Note 2) * | 2θ1/2 | --- | 60 | --- | Deg | IF=100mA |
Peak Emission Wavelength | λp | --- | 850 | --- | nm | IF=100mA |
Spectral Bandwidth | λ | --- | 45 | --- | nm | IF=100mA |
Forward Voltage | VF | 1.40 | 1.45 | 1.85 | V | IF=100mA |
Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous Radiant is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Infrared LED Light Components Package Dimension: