PLC Digital Control System Concrete Pipe Wire Making Machine
Product features:
1. With small tolerance and good forming quality, automatic rebar Wind up mechanism can adjust the space between rebars in operation.
2. Automatic welding, accurate solder joint and labor intensity reduction.
3. Frequency converter controlled high precision Cage-drawing system.
4. Automatic cage holding design can prevent the cage from bending accident, which is caused by its weight in the middle of welding.
5. Automatic loading mechanism can speed up the loading rate and increase productivity.
6. The mould consists of moulding ring and conduit, which can adjust cage diameter and main rebar quantity fastly.
7. Forward and reverse roll type straightening mechanism with characteristics of long service life and good straightening effect.
8. Controlling system consists of Panasonic PLC, Panasonic touch screen, ABB frequency converter.
Working Principle:
This machine includes three plates , one is the main plate rotating, the second plate is pushing wire, the other plate is used to Diameter-transformed automaticly. The three plates are controlled and drove by its own motor and variable Frequency control system.
Application:
This machine is the Special-purpose welding equipment for making the steel wire cages for the Reinforced concrete drainage pipes, it is capable to weld the Reinforcement cages with Socket&Spigot ends, and Flush or male& female ends. It is one of the main equipments to manufacture the Reinforced concrete pipes.
Announcements :
1. this machine should use cold-drawn and low-carbon steel with the non-oxidation, no rustiness and oil stains. Its diameter should not be over that stated parameter values, otherwise it will damage to the welders. When welding steel with 7-8mm diameter, you should low down the speed, in case producing too much heat to the welding machine.
2. Assure the Groove of conductive cooper bush on the Welders coincide with the diameter of Latitude steel, otherwise it will be difficult to put and push through the steel wire.
3. check-up the cooling water system: turn on the water pump, look over if there is water in the water tube, and water flow rate is enough, or else clean the water cycle system.
4. when you use the machine for the first time, please let it empty running, and you should make everything go on well, without loose and abnormal noise and liberation.
5. Please not use the machine when it rains and with thunder, and please turn off the total electrical power.
| Specification | Parameter |
| Validity Dia |
Socket: 800-1800mm Flat: 800-2000mm |
| Max length of welding | 4000mm |
| Dia.of steel wire |
Latitude:3.5-6mm Longitude:4-6mm |
| Quantity of longitude wire | 12 |
| Span between latitude wire | 20-150mm |
| Angle of spigot | 10-25degree |
| Rotation speed of main plate | 0-10RPM |
| Motor power | 0.55+1.1+2.2KW |
| Transformer power | 150KVA |
About Us:
We are the professional concrete pipe machine manufacturer, which have more than 20 years concrete pipe making experiences and more than 8 years pipe machine making experiences. There are 10 pipe making factories under our mother company, every pipe making factory use pipe machines produced by ourselfe, it makes sure that we can upgrade pipe machines according to the mareket and customer requirment.
Our machine has been sold 20 countries around the world, customers help us know well about their local market, at the meantime, it helps us satisfy foreign maket better and better.
