German imported pipe with 15 inch big screen 808nm diode laser machine
Technical Specifications
| Output Mode | Pulse output |
| Control Method | Touch control |
| Energy density | 48~168J, 20~70J/cm2 (Deviation≤±2%) |
| Pulse width range | 5-400ms |
| Light spot surface temperature | 0-30°C |
| Dimension(cm) | 70*44*1175px |
| Net weight | 30kg |
| Fuse specification | Ø5×25 10A |
| Input Power | 1800W |
| Input voltage | AC220V, AC110V; 50Hz, 60Hz |
Cooling system
1.Wind,water and semiconductor 3 strong cooling systems, make sure the machine 24 hours nonstop continue working.
2.Booster pump: High power booster pump,guarantee good water circulation.
3.Water tank: 6L stainless big water tank.
4. Pure copper radiator: 2 big pure copper radiators.
5. DC fans: 4 big power DC fans, strong wind with less noise.
6.Semiconductor cooling : 2 semiconductor cooling pieces in the handle to make its temperature reach low degree quickly.
7. Temperature of Crystal: The crystal can reach -5 ℃when the machine is working. Super strong cooling system has been proved very well.
Machine Appearance
Treatment Principle
Laser and light sources use selective photothermolysis to eliminate hair and its potential regrowth without damaging the surrounding skin. During a laser hair removal treatment, light passes through the skin and is absorbed by the melanin in the hair shaft. This absorption raises the temperature of the hair follicle and thermally destroys the cells responsible for regrowth. The attributes of the 808nm light (wavelength, pulse duration and power) are chosen to ensure damage to these cells and not to the rest of the skin.
Treatment step
1. Patch Test
Our laser technocians begin with the procedure by doing a patch test 48 hours before your treatment. This test is to determine if your skin exhibits an allergic reaction. 95% of our patients do not get any sort of reaction.
2. Shaving the Area
Make sure you shave the area the night before for your skin to be less sensitive to the laser.
3. Applying Gel
The therapist will apply cooling gel on the area being treated to help cool and glide the laser.
4. Laser Safety Goggles
In order to carry the procedure safely, both clients and operators will be given a protective eye wear.
5. Durantion of the Process
The average time taken is 20 minutes for the face and 5 minutes for the underarms.
For bikini it takes on average 15 minutes whereas for legs and back (where there's significantly more area) it takes 45 minutes to an hour. On average, you'll probably need 4 to 6 treatments, every 4 weeks a treatment. However the number of treatment may vary with your skin type, skin colour and hair growth.
6. Post Treatment Care
Apply aloe Vera or hydrocortisone cream to treatment areas to ease temporary discomfort. Ice packs may also be used if swelling occurs. Strictly avoid any sun exposure for at least 2 weeks after the laser hair removal treatment, as the treated area will be more prone to sunburn and pigmentation change. Keep the area covered and use a sunscreen with a 30+ protection whilst outdoors.
Treatment Results
