High Speed Surface Floating Aerators Wastewater Treatment Automatic With Stainless Steel Impeller
Application:
| 1 | The high speed aerator line is designed to maximize the two most important functions of any aeration device-oxygen transfer and mixing of waste. |
| 2 | The waste liquid is pumped through the unit in a manner which creates the most advantageous spray pattern for introducing oxygen into the liquid. |
| 3 | tank mixing characteristics but perform these functions in the most economical and reliable manner. |
Features:
| 1 | Each aerator shall consist essentially of a motor, drive shaft, impeller directly driven at constant speed, and an integral flotation unit, which shall support the weight of certain accessories that may be added. |
| 2 | All wetted metal parts shall be of corrosion resistant materials, and shall not require painting. |
| 3 | IMPELLER The impeller is constructed of stainless steel and is manufactured using the machined-pitch process which assures perfect impeller accuracy and top performance. The impeller pitch is designed for maximum hydraulic delivery without overloading the motor. FLOATION ASSEMBLY The floatation hull is constructed of reinforced fibre-glass. |
Construction:
Performance parameters:
| Type | Motor | Surface serator | |||||
| Power (hp) |
Speed (r/min) |
OC-HR (kg/h) |
MD (m) |
MZ (m) |
D (m) |
PR (m³/min) |
|
| SAR-32 | 2 | 1450 | 3.0 | 6 | 12 | 2~3 | 5 |
| SAR-33 | 3 | 1450 | 4.2 | 9 | 18 | 3~4 | 7 |
| SAR-35 | 5 | 1450 | 6.6 | 12 | 24 | 3~4 | 9 |
| SAR-37 | 7.5 | 1450 | 9.6 | 16 | 32 | 3~4 | 11 |
| SAR-310 | 10 | 1450 | 11.5 | 19 | 38 | 3~4 | 19 |
| SAR-315 | 15 | 1450 | 16.5 | 27 | 54 | 3~4 | 24 |
| SAR-320 | 20 | 1450 | 21.0 | 32 | 64 | 3~4 | 29 |
| SAR-325 | 25 | 1450 | 27.5 | 36 | 72 | 3~4 | 33 |
| SAR-330 | 30 | 1450 | 31.0 | 40 | 80 | 3~4 | 37 |
| SAR-340 | 40 | 1450 | 38.0 | 45 | 90 | 5~6 | 46 |
| SAR-350 | 50 | 1450 | 50.0 | 50 | 100 | 5~6 | 55 |
| SAR-360 | 60 | 1450 | 61.0 | 56 | 112 | 5~6 | 65 |
| SAR-375 | 75 | 1450 | 73.0 | 62.5 | 125 | 5~6 | 80 |
| SAR-3100 | 100 | 1450 | 95.0 | 70 | 140 | 5~6 | 120 |
Attention:
1. To prevent damage during transportation, the SAR should be transported in the vertical position.
2. Do not use the eyebolts on the float to hoist or pull the SAR.
3. The hoisting hook is attached correctly to the eyebolts on the motor and these eyebolts should be fully screwed before hoisting.
4. Making sure operating current is within the rated current which prints on the nameplate of SAR.
5. If the motor rorating is failed within one or two seconds, turn off the power supply immediately.
6. Check the trouble shooting flow chart and take the correct actions before restart the units.
Work shop:
