Stainless Steel SUS304 Compact Pressurized Heat Pipe Solar Heater Install on Slope Roof
|
Heat Pipe Vacuum Tube |
Glass Tube | Φ58*1800mm three-target coat SS-AL-N/CU |
| Heat-conduction | Copper heat pipe tube wrapped with aluminum | |
| Tube Qty | 30 tubes | |
| Water Tank | Capacity | 300L |
| Inner tank | Stainless steel SUS304-2B or SUS316L | |
| Insulation | Integral high-density polyurethane foam | |
| Tank shell | Stainless Steel SUS304-BA | |
| Bracket | Material | Aluminum Alloy |
| Tilt angle | 25°- 50° according to local latitude | |
| Optional Device | Electrical heater, T/P valve, Safety valve, Anode magnesium | |
| Water Output | 45-95oC according to local solar irradiation and duration | |
| Working Pressure | 6.0 bar | |
| Hail Resistance | Φ25mm | |
| Wind Resistance | 140 km/h | |
Description
1) Inner tank material: SUS304-2B stainless steel. Available thickness is 1.2-1.5mm.
2) Outer tank material: Color chromed steel or galvanized steel or stainless steel.
Available thickness is 0.5mm.
3) Heat pipe Vacuum tube: 58x1800mm
Material: High borosilicate glass, three-layer coated vacuum tube.
Over 15 years service life. Hail resistance: 25mm.
4) Insulation layer: High density polyurethane foam, available thickness is 50-60mm.
5) Very popular tank capacity in present markets is 150-300L.
6) Frame material: Aluminum alloy.
Stainless Steel SUS304 Compact Pressurized Heat Pipe Solar Heater Install on Slope Roof working principle
1.The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot
3.No water in the heat pipe makes the whole system could bear pressure
Applications:
Domestic hot water for shower, washing
Competitive Advantage:
1.INLIGHT heat pipe tube for thermal transmission, with super heat exchanging efficiency and rapid hot water heating
2. The whole system is pressurized and works under high water pressure automatically, more comfortable shower.
3. Water does not flow into glass tubes, withdrawal of one or several heat pipe tubes would not drain out the whole system;
4. Super heat preservation with integrated polyurethane foam; No air-vent with little heat loss in tank and water pipeline
5. Design of pressurized tank is reasonable and scientific, which could hold 100,000 times fatigue test without any damage.
6. Designed to be equipped with auxiliary electric booster and intelligent controller for much more automatic operation;
7. Anti-freezing solar water heater which is able to be used all year round even in extremely cold climate;
8.Simple structure, easy for assembly and installation on different roof structure
