Household Use Stainless Steel Integrated Pressure Heat Pipe Solar Water Heater
|
Heat Pipe Vacuum Tube |
Glass Tube | Φ58*1800mm three-target coat SS-AL-N/CU |
| Heat-conduction | Copper heat pipe tube wrapped with aluminum | |
| Tube Qty | 15tubes | |
| Water Tank | Capacity | 90L - 300L |
| Inner tank | Stainless steel SUS304-2B or SUS316L | |
| Insulation | Integral high-density polyurethane foam | |
| Tank shell | Stainless Steel SUS304-2B | |
| Bracket | Material | Aluminum Alloy with Aluminum Reflector |
| Tilt angle | 25°- 50° according to local latitude | |
| Optional Device | Electrical heater, T/P valve, Safety valve, Anode magnesium | |
| Water Output | 45-95oC according to local solar irradiation and duration | |
| Working Pressure | 6.0 bar | |
| Hail Resistance | Φ25mm | |
| Wind Resistance | 140 km/h | |
Description
1) Inner tank material: SUS304-2B stainless steel. Available thickness is 1.2-1.5mm.
2) Outer tank material: stainless steel SUS304-2B
Available thickness is 0.4mm.
3) Heat pipe Vacuum tube: 58x1800mm
Material: High borosilicate glass, three-layer coated vacuum tube.
Over 15 years service life. Hail resistance: 25mm.
4) Insulation layer: High density polyurethane foam, available thickness is 55mm.
5) Very popular tank capacity in present markets is 150-300L.
6) Frame material: Aluminum alloy with Aluminum Reflector
Household Use Stainless Steel Integrated Pressure Heat Pipe Solar Water Heater working principle
1.The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot
3.No water in the heat pipe makes the whole system could bear pressure
Applications:
Domestic hot water for shower, washing
Competitive Advantage:
1. High efficiency, rapid water heating with INLIGHT heat pipe tubes.
2. INLIGHT three-target tube for heat pipe ensures no fall-off coat under high temperature;
3. Breaking or withdrawing one or several heat pipe tubes does not drain the solar system.
4. INLIGHT heat pipe tube is designed to work within temperature rage (-)40 oC ~ 300 oC;
5. Every of INLIGHT heat pipe have been tested before delivery to ensure no dead heat pipe;
6. The whole solar system is pressurized and works under high water pressure automatically.
7. INLIGHT water storage tank is designed to bear 100,000 times fatigue test without any damage.
8. T/P valve and safety valve works together to ensure no excess heat or pressure inside system;
9. The simple structure is designed for easy installation and pipeline connection;
10. INLIGHT aluminum alloy frame is designed for slope and flat roof installation;
11. Equipped with INLIGHT electric heater and solar controller the system is more intelligent;
12. Sample solar water heater is installed for every order to ensure no mistakes or missing parts for customers.
