100L Stainless Steel Integrated Pressurized Flat Plate Solar Water Heating
Technical Parameters:
|
Flat Panel Solar Collector |
Spec. (mm) | 2000*1060*70 /2000*1060*80 /2000*1060*90 |
| Cover glass | Tempered woven glass / low-iron tempered glass | |
| Coating | Black Chrome coat | |
| Absorber | Copper headers and risers, copper /aluminum absorber plate | |
| Insulation | Glass wool / Polyurethane foam | |
|
Pressure Water Tank |
Capacity | 100 - 300L |
| Inner tank | Stainless steel plate SUS304-2B /SUS316L | |
| Insulation | High-density polyurethane integrated foam | |
| Tank shell | Stainless steel | |
| Bracket | Material |
Aluminium alloy |
| Tilt angle | 20°- 50° | |
| Optional Device | Electrical heater, Intelligent controller, Anode magnesium | |
| Working Pressure | 6.0 Bar | |
| Wind Resistance | 140 km/h | |
Description
Flat Plate Solar Collector:
1) Copper core and pipes in flat plate as heat exchanger, with a quick startup and super efficiency.
2) Three high-tech methods of coating (Selective coating / Black chrome / Titanium-Nitride-Oxide) to meet your upper needs
3) Ultrasonic technology ensures seamless jointing of copper core and pipes
4) Modularized collector, arbitrary combination with architectural structure, adaptable to either slope or flat roof, little maintenance needed
Pressurized Water Tank
1) Inner water tank: Food-grade stainless steel SUS304-2B as inner tank keeps the water clean and drinkable, automatic argon-arc welding technics ensures long lifespan (15 years) with good pressure bearing.
2) Water tank shell: Color steel plate much durable and appealing. Stainless steel shell makes it a choice for higher requirements.
3) Insulation Layer: Germany-imported polyurethane integrated foam-forming with twice slaking treatment, preserves hot water constantly
4) Pressurized water tank with super hydraulic bearing pressure makes your life more comfortable
5) Copper coil could be installed inside water tank for twice hear exchange efficiently, one more copper coil installed could be connected with radiator or other devices for house heating or connected with other heating devices such as gas to assist solar water heating.
100L Stainless Steel Integrated Pressurized Flat Plate Solar Water Heating Working Theory:
INLIGHT pressure flat panel solar water heater is a kind of open-loop thermosiphon system, a thermosiphon solar system relies on warm water rising, a phenomenon known as natural convection, to circulate water through the flat panel and to the tank. In this type of installation, the tank must be installed above the solar collector, as water in the panel heats, it becomes lighter and rises naturally into the tank above, meanwhile, cooler water in the tank flows down into the flat panel collector, causing circulation throughout the system.
The tank and flat panel are both pressurized so we share hot water with same pressure as inlet water.
Features of Flat Plate Solar Water Heater
1. Safe and steady
Flat plate solar collector uses all cooper fluid tube; System operating is steady; components are not easy to be damaged;
2. Pressurized operating
Working pressure is 0.6Mpa; designed pressure is 1.2Mpa; the hot water is forced to stream out from the top; it is convenient to use.
3. High heat efficiency
Absorbing coating of the collector is black chrome and blue sputtering; absorbing rate is 92-96%, and emission rate is 5%-15%; heat efficiency is high
4. Good temperature preservation
Thickness illustration layer is 50mm; constant temperature high pressure quantitative foam; less than 5 Celsius Degree per 24
5. Long using life
Inner tank is 1.2-2.0mm stainless steel; resist high temperature and corrosion; 15 years using life.
6. Several models fulfill different user need
According to customers’ requirement, we put our several modes with different specifications to suit flatlet, villa, hotel and factories. , etc
7. Easy installation
