Integrated Pressurized Stainless Steel Solar Hot Water Heater with Copper Heat Pipe
| Item No. | Water Tank | Solar Vacuum Tube | Insulation | Packing | Container Loading | ||
| Capacity (L) | Qty / Pcs | Size / mm | mm | cbm/set | 20GP | 40HQ | |
| ILCP -5818A470S-12H | 120 | 12 | Φ58*1800 | 55 | 0.45 | 63 | 154 |
| ILCP -5818A470S-15H | 150 | 15 | Φ58*1800 | 55 | 0.53 | 53 | 130 |
| ILCP -5818A470S-18H | 180 | 18 | Φ58*1800 | 55 | 0.64 | 44 | 107 |
| ILCP -5818A470S-20H | 200 | 20 | Φ58*1800 | 55 | 0.70 | 40 | 99 |
| ILCP -5818A470S-24H | 240 | 24 | Φ58*1800 | 55 | 0.80 | 35 | 86 |
| ILCP -5818A470S-30H | 300 | 30 | Φ58*1800 | 55 | 1.02 | 27 | 68 |
| ILCP -5818A470S-36H | 360 | 36 | Φ58*1800 | 55 | 1.18 | 24 | 58 |
| 1. Inner tank: Food-grade stainless steel SUS304-2B or SUS316L with 1.2mm-1.5mm thickness | |||||||
| 2. Tank Exterior Shell: High quality stainless steel 0.4mm | |||||||
| 3. Heat Insulation: High-density polyurethane integrated foam-forming insulation layer | |||||||
| 4. Vacuum Tube: Red copper heat pipe, three-target glass tube, aluminium fin | |||||||
| 5. Bracket: Aluminum alloy, suitable for slope and flat roof installation | |||||||
| 6. Optional Devices :Electric heater, Intelligent Controller, Anode magnesium bar,T/P & Safety valve | |||||||
| 7. Rated Working pressure: 6.0 Bar | |||||||
| 8. Angle of bracket: 25°~51° | |||||||
| 9. Anti-freezing: > -40°C | |||||||
Description
1. Inner Tank: Made of thick food-grade stainless steel SUS 304-2B with seamless argon-arc welding, more than 30 years lifespan
2.Tank Exterior Shell: Anti-erosion color steel fluorocarbon (PVDF) plate as exterior shell has a super character in chemical resistance Stainless Steel shell SUS304 with its good performance and appearance enjoys much popularity in most solar market
3.Insulation Layer: High-density polyurethane integrated foam-forming with twice slaking treatment ensures long lasting heat preservation
4.Bracket: Supporting bracket is designed for 140 km/hr wind load with corrosion resistant treatment to meet ocean coast weather
Stainless Steel Pressurized Solar Water Heaters with Copper Heat Pipe working principle
1.The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot
3.No water in the heat pipe makes the whole system could bear pressure
Applications:
Domestic hot water for shower, washing
Competitive Advantage:
1.Adopts the best conduction performance metal- heat pipe (copper)
2.Can be used all year round in the cold climate
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa
5.No water in the tube, one tube broken don't influence the system working
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7.Dual-purpose brackets for both flat and inclined roof
8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out
