S&G C/Z purlin cold roll forming machineReady Fully Automatic C Purlin Production Line Machine Widt

S&G C/Z purlin cold roll forming machine,Ready Fully Automatic C Purlin Production Line Machine Width Adjustable

This type of the C/Z purlin cold roll forming machine is used to form components, such as purlins, having C-shaped and/or Z-shaped cross-sections from sheets of planar material.It is provided with a plurality of cold roll forming machine adapted to form the first and the second components each of which has a C-shaped cross section with a center portion and a pair of legs connected to the center portion, where the legs of the first component have a first length and the legs of the second component have a second length different than the first length. The cold roll forming machine include a first roll forming station having a plurality of forming rolls and a second roll forming station for forming the legs of the first and second components. The second roll-forming station has a first pair of forming rolls, a second pair of forming rolls, and a mechanism for supporting the pairs of forming rolls and for adjusting the position of the pairs of forming rolls from a first position in which the second pair of forming rolls make contact with a portion of the first component to a second position in which the second pair of forming rolls make contact with a portion of the second component.

Equipment structure:

It is making up of decoiler, guide rack, roll forming, correction, cutting-to-length(punching), collection table, electrical control system etc.

Unit performance:

(1) Machine capacity:width≤500mm,thickness:1-2.5mm
(2) Product speed: 0-15m/min
(3) Total power: about35.5kw
(4) Pressure:380V
(5) Occupy groud area:length 18m xwidth3m

Each part main parameter:

(1) Decoiler: decoiler,Inner expanding type,capacity:5T
(2) Guide Rack:two pairs of lever rollers and four pairs of standing rollers.
Flatting number:9 sets
(3) Roll forming

(4) Adjust part:Turkey emendation type(three-dimensional emendation)
(5) Cutting-to-length: Hydraulic pressure cutting

Specifications:

Material	Raw material	colored steel plate, galvanized plate, or aluminum plate
	Thickness	1.5 - 3 mm (As customer`s need)
	Feeding width	300mm-1000mm (According to customer`s profile)
	Material hardness:	550 Mpa---350 Mpa
Manual Uncoiler	Inner Diameter	450-550mm
	Max Coil width	1500mm
	Capacity	1-5T
Main Forming machine	Forming steps	17 stations ( Depend on Profiles )
	Shaft diameter	Φ40-80mm
	Design type	Middle plate welded
	Transmission	Gear box (Chain and gear box depend on thickness and customer`s need)
	Machine frame	350# H steel welded; Steel plate welded/ Memorial arch frame type
	Roller material	Gcr15MoV
	Shaft material	45# steel with tempering
	Cutting blade material	Gcr12MoV quenched
	Working speed	15-20m/min
	Power of machine	3-11KW (According to the thickness)
	Type of cutting	Hydraulic
	Cutting tolerance	±1mm
	Material of blades	Gcr12 quenched
	Cutter quantity	1 set
	Working pressure	20MPA
Hydraulic cutting system	Hydraulic oil	46#
	Hydraulic power	7.5KW
	Cutting length	As required
	Frame	Pillar style with rack & pinion system
	Stroke switch	Non-contact photoelectric switch
	The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And two sets of electromagnetism valves.
Configurations	Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→Auto cutting→ Products receiving N.B: you can choose the Perforation machine and punching part as your demand.

Send message to this supplier

Mr. Mr. Gussi Wong Tel: 86-510-5605508
	Enter between 20 to 3,000 chatacters.

Contact Method

SG Engineering Solution Lmt.

No.18, GaoYun Rd, BinHu District, Wuxi, Jiangsu, China (Mainland)