12 Volt Diesel Fired Engine Truck Parking Heater Lower Fuel Consumption
Instructions for installation
Parts of the structure and other components near the heater must be protected from excess heat
exposure and possible contamination from fuel or oil
The heater must not pose a fire hazard even when it overheats.This requirement is deemed to be
fulfilled when adequate clearance to all parts is observed during installation,sufficient ventilation is
provided and fire-proof materials or heat plates are used.
All appropriate precautions must be taken when arranging the heater to minimize the risk of
injuries to persons or damage to other property.
Package list
No. | Name | Specification | QTY |
1 | Parking heater | FJH-4.0/2C ( ) | 1 |
2 | Main wiring harness | 12V( ) | 1 |
3 | Fuel pump | 12V( ) | 1 |
12V with damper( ) | |||
4 | Filter | Only diesel | 1 |
5 | Fuel pipe(from pump to heater) | φ4/φ2 L=6800 | 1 |
6 | Fuel pipe(from pump to fuel tank) | φ5/φ2 L=1200 | 1 |
7 | Control switch | 1 | |
8 | Protective gasket(control switch) | 1 | |
9 | Air inlet pipe | φ29/φ25*600 | 1 |
10 | Exhaust pipe | φ24*700 ( ) | 1 |
φ24*1000( ) | |||
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|