A weld neck flange (also known as a high-hub flange and tapered hub flange) is a type of flange. WeldNeck Flange is easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.
There are two designs. The regular type is used with pipes. The long type is unsuitable for pipes and is used in process plant. A weld neck flange consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has a series of drilled holes that permit the flange to be affixed to another flange with bolts.
Such flanges are suitable for use in hostile environments that have extremes of temperature, pressure or other sources of stress. The resilience of this type of flange is achieved by sharing the environmental stress with the pipe with which it is welded. This type of flange has been used successfully at pressures up to 5,000 psi.
These flanges are bored to match the inside diameter of the mating pipe or fitting so there will be no restriction of product flow. This prevents turbulence at the joint and reduces erosion. They also provide excellent stress distribution through the tapered hub and are easily radio-graphed for flaw detection.
Weld neck flange will be welded to a pipe or fitting with a single full penetration, V weld (Butt-weld).
| Flange Type | Welding Neck flange, Slip-On; Socket Welding, Blind, Thread, Lap-joint; Long Welding Neck; Orifice; All flanges in Raised Face, Flat face and RTJ; |
| Material | ASTM A105; A350 LF2; A694 F42, F46, F52, F56, A182 F12/F22/F5/F9/ F91; A182 F304/F304L/F316/F316L, etc. |
| Size | 1/2"~60", as the clients' requests; |
| Pressure | Class: 150 300 400 600 900 1500 2500; PN6,PN10,PN16,PN25,PN40;5K,10K,16K,20K,30K |
| Standard | ASME B16.5, ASME B16.47, MSS SP43, EN1092,DIN, JIS; |
