Li-Polymer Battery Pack 3.7V 3000mAh with PCM, LI-PO cell 805068, also for medical, shaver and security alart
Advantages:
1, High energy density
2, High working voltage for single battery cells
3, Pollution-free
4, Long cycle life
5, No memory effect
6, Capacity, resistance, Voltage, platform time consistency is good
7, With short-circuit production function, safe and reliable
8, Factory price& High quality
9, Good consistency, low self discharge
10, Light weight, small size
Main Application:
Mini Bluetooth Keyboard Flashlights, POS machine, fishing equipment, smart phone, bluetooth headest, loundspeakers, traffic tester, curing light, portable EGC monitor, portable oxygen making machine, portable outdoors speaker, vehicle intelligent terminal, LED light, handset, …
Specification:
|
Name |
Deep cycle Lipo 3.7V 3000mah battery 805068 |
|
Model |
805068 |
|
Size |
Thickness × Width × Length (mm) |
|
8.5×51×70 |
|
|
Nominal voltage |
3.7V |
|
Nominal capacity |
5000mAh |
|
Max charge current |
1C |
|
Charging method |
charge with constant current 1C to 4.2V, then charge with constant voltage 3.0V till charge current is less than 0.01C |
|
Max discharge current |
1C |
|
Discharge cut-off voltage |
3.0 V, the over-discharge detection voltage of PCM |
|
Operating environment |
Charging, 0°C ~ 65°C ; 65±20%RH |
|
Discharging, -20°C~80°C ; 65±20%RH |
|
|
Storage environment |
-20°C~45° |
|
65±20%RH |
|
|
storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH;3.7~3.9V |
|
|
CycleLife(80%Prime Capacity) : |
>500times |
|
warranty |
Period of warranty: 12 months after sales |
|
Identification |
With protection board PCM for over charging, over discharging,short circut,over voltage. |
|
Using the charger designated by the manufacture. |
|
|
Don't throw the battery in fire or heat it. |
|
|
Don't short-circuit. |
|
|
Don't unpack the battery or change its structure. |
|
|
Pack design |
Battery pack should have sufficient strength and battery should be protected from mechanical shock |
|
No cell movement in the battery pack should be allowed. |
|
|
No Sharp edge components should be inside the pack containing the battery. |
|
|
Charging |
Charging current and charging voltage should be less than specified in the Product Specification. |
|
The charger shall be designed to comply with Product Specification. |
|
|
It is dangerous that charging with higher curren or voltage than Product Specification may cause damage to the cell electrical,mechanical safety performance. |
Safety P
