Slim RO Water System Filter Cartridge Housing With PP AS Material
Household Plastic Filter Housing
Features & Benefits
A . High quality PP and AS material in conformity with FDA standard
B . Thicker housing and rib design can withstand more pressure
C . Opener,air release button,brass thread fitting and more options
Technical Specifications
A . MAX.Pressure : 8 Bar (115 psi )
B . Failure test pressure : 30 Bar ( 435 psi )
C . Cycle test pressure : 0 - 115 psi , 100000 cycles
D . Recommended pressure : < 6 Bar ( 88psi ) , 25
E . MAX.Temperature : 50
F . Flow rate and pressure loss depend on filter elements type
Warning : Do not expose filter housing to sunshine !!!
In & Outlet : 1 '', 1/2 '' or 3/4 '' In & Outlet material : plastic port or brass port
Size : 5inch , 10inch , 20 inch Type : Jumbo or Slim
Clolor: while , blue , semitransparent Cover material : Polypropylene
Single : ' ' O '' ring inside
This filter housing is made of reinforced polypropylene and it can used in family or commercial occasions such as factory , large swimming pool , school , family water inlet,gardening irrigation .
1 . The bigger filter housing can be filled with high flow rate filter cartridge applying to high flow rate .
2 . This filter housing can perform a very good chemical resistance .
3 . The upper cap is also made of reinforced polypropylene .
Special requirement can be customized !
