Big RO JUMBO Water Filter Housing Clear / 20 Inch Filter Housing Single O ring
Specifications
Jumbo Transparent Filter Housing are made of SAN material with innovative features like lower pressure drop at higher flow rate .
GPS Jumbo Transparent Filter Housings are made of SAN material with innovative features like lower pressure drop at higher flow rate , larger connections, air venting provision , robust knife - edge , molded structure , zero bypass and leak proof sealing. They are sealed with top seated Buna - N / Silicon / Viton * O ring by positive tangential contact that eliminates accidental misplacement .
The larger body size allows for greater cartridge capacity , thus reducing the number of vessels normally required in parallel installation . The internal port has been enlarged from standard size to allow liquid to pass through with minimum restriction .
Housings are stress relieved for added clarity and strength . Transparent housings offer on - site examination of flow , cartridge performance and life.
Caps are manufactured of reinforced polypropylene and are available with 1 and 1.5 BSP ( F ) connections to match various flow rating and piping configurations . Caps are available with a pressure release mechanism to release the housing pressure when changing a cartridge .
Pressure relief mechanism is constructed of stainless steel spring and screw and black polypropylene button .
All caps come with four mounting brackets for easy installation .
All housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance .
* Viton is a registered trademark of Dupont.
Features & Benefits
- Highly durable SAN material
- Lower Pressure Drop @ Higher Flow Rate
- Specially designed for higher flow rates.
- Ideal substitute for costly low pressure SS housings.
- An extra large cartridge results in higher dirt holding capacity.
- Molded Construction for Product Consistency
- Robust knife-edge design ensures consistent cartridge sealing
- Thicker Walls for Increased Strength
- Leak Proof Sealing
- Larger Connection for Maximum Output
- Air Release Mechanism
- Mounting Holes Provision
Materials of construction
Sump : SAN (Styrene Acrylo-nitrile)
Head : Reinforced Polypropylene
Vent : Polypropylene with SS Spring and Screw
Seal : Silicon
Configurations
Inlet/Outlet connection : 1 , 1.5
Connection type : Threaded BSP (F)
Cartridge type : DOE
Vent : Provided
Operating conditions
Max . Operating Pressure : 7 kg/cm2
Max . Operating Temperature : 700C
Cartridge Capacity
Single
Cartridge dimensions accepted
i) 110 mm OD X 10/254 mm
ii) 110 mm OD X 20/508 mm
